Help on my new Diamond Headlights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 12-27-2005, 06:43 PM

Got these for Christmas and they didn't come with any directions. Anybody use these before and can help on the install?

farside847 · 12-27-2005, 07:20 PM

3 wires, high, low and common. Now comes the fun part - which is which?

Is there a part number anywhere on them?

5150 · 12-27-2005, 07:47 PM

I don't see a part number but it is a-----12V60/55W light

68Stepbed · 12-27-2005, 09:22 PM

Sorry Bryan, mine had an H4 lamp. Take them to a parts srore and see if they'll interchange so you can keep your stock plug.

skeeter288 · 12-27-2005, 11:26 PM

never seen those before.were they in a box?can you contact the manufacturer for directions? they look similar to trucklite converion to the type that uses th 9004 bulb but can't be sure.

chevyguy_72 · 12-28-2005, 10:15 AM

looks like my h4 setup minus the bulb. Looks to me that you just need to buy the h4 bulb of your choice and put it in. The h4 plug will plug directly into your existing sockets. That wire should come unhooked from the end that does not have the screw and hinge up. That plastic piece should come out and the bulb should go in there. rehook the wire and put the rubber boot on to protect it. (not sure what these guys are talking about, i only see 3 pics and they are all of the housing, don't see any wires.)
I can get pics later tonight if you need them
Hope this helps

5150 · 12-28-2005, 06:03 PM

Yes, pics would be great. My mother-in-law got them from southern kentucky classics and they were for the 67-72 conversion. I've contacted them by email , but I'll call them and try to see if they can send me some info on them.

**tnblazerk5** · 12-28-2005, 06:13 PM

Quote:

Originally Posted by chevyguy_72

looks like my h4 setup minus the bulb. Looks to me that you just need to buy the h4 bulb of your choice and put it in. The h4 plug will plug directly into your existing sockets. That wire should come unhooked from the end that does not have the screw and hinge up. That plastic piece should come out and the bulb should go in there. rehook the wire and put the rubber boot on to protect it. (not sure what these guys are talking about, i only see 3 pics and they are all of the housing, don't see any wires.)
I can get pics later tonight if you need them
Hope this helps

are they glas or plastic ? looks like the ones i got in the 67 mine are glass and had dot molded into them sun of those dont have the dot on them ya might want to look at yours and make sure its on there

FRENCHBLUE72 · 12-28-2005, 06:25 PM

Those look like my old ones that I had on my blazer quite awhile ago they sure did not work for me??

68Stepbed · 12-28-2005, 10:50 PM

Didn't come out too well. best I could get with them still in. Hope they help.

**GMCPaul** · 12-28-2005, 11:54 PM

chevyguy_72 said it correctly you have the wrong bulbs installed in the headlights, you need the H4 halogen bulbs installed in place of the ones currently in it and then your harness will plug right in.
GMCPaul

LUV2XCLR8 · 12-29-2005, 08:37 AM

Quote:

Originally Posted by yellow69

Got these for Christmas

Man can I be adopted, you sure get nice B-day and Christmas gifts

chevyguy_72 · 12-29-2005, 10:19 AM

sorry no pics my ftp site was down all night hopefully it will be up tonight and i can upload them. The ones 68stepbed posted look the same as mine so hopefully they helped you.

Bill72BB · 12-29-2005, 01:54 PM

Again : from the pictures I see ; in Pic #2 the back of the light ,looks like you have to remove the spring clip and the white plastic and replace it with a 55/65 H4 bulb and install to your stock wiring .
That is how mine worked , I just didn't have the plastic retainer .

5150 · 12-29-2005, 02:03 PM

Thanks guys plan on trying to knock it out tomorrow.

Hey Craig-I don't want to hear about my gifts if I recall you had a little early Christmas gift that came from my neck of the woods. I can't exactly recall what it was, OH YEAH! A 2WD BLAZER!!!!!!!

Bill72BB · 12-29-2005, 02:10 PM

Quote:

Originally Posted by yellow69

Thanks guys plan on trying to knock it out tomorrow.

Hey Craig-I don't want to hear about my gifts if I recall you had a little early Christmas gift that came from my neck of the woods. I can't exactly recall what it was, OH YEAH! A 2WD BLAZER!!!!!!!

Make sure you use a 65/55 watt bulb , if you want to go higher you should install one of the HL wiring upgrades .

Good Luck

5150 · 12-29-2005, 05:59 PM

I have done the Headlight Relay Install. Will that enable me to use a bulb with more wattage?

Bill72BB · 12-29-2005, 07:59 PM

Quote:

Originally Posted by yellow69

I have done the Headlight Relay Install. Will that enable me to use a bulb with more wattage?

The upgrade will increase voltage to the bulbs which will make the stock wattage bulbs brighter , if you used one of the wiring kits Most allow you to use 100 watt bulbs .

meathead95 · 12-29-2005, 10:16 PM

hey bud i thought i would let you know in my new summit catalog they have a new air filter top that matches your wheels. it is something different and looks pretty cool. if yah give a crap.

5150 · 12-29-2005, 10:42 PM

Bill, I just used the relay and my own wiring to do the upgrade. I'll see what kind of H4 bulbs they have at my local Advance.

Hey Keith-I checked out the air filter assembly-WOW it's sweet but I don't think it's $191 WOW. Maybe I can find it somewherelse cheaper.

12-27-2005, 06:43 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Help on my new Diamond Headlights Got these for Christmas and they didn't come with any directions. Anybody use these before and can help on the install? Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-27-2005, 07:47 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Help on my new Diamond Headlights I don't see a part number but it is a-----12V60/55W light __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-27-2005, 09:22 PM	#4
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Help on my new Diamond Headlights Sorry Bryan, mine had an H4 lamp. Take them to a parts srore and see if they'll interchange so you can keep your stock plug. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

12-27-2005, 11:26 PM	#5
skeeter288 Registered User Join Date: Dec 2005 Location: baltimore, maryland Posts: 14	Re: Help on my new Diamond Headlights never seen those before.were they in a box?can you contact the manufacturer for directions? they look similar to trucklite converion to the type that uses th 9004 bulb but can't be sure.

12-28-2005, 10:15 AM	#6
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Help on my new Diamond Headlights looks like my h4 setup minus the bulb. Looks to me that you just need to buy the h4 bulb of your choice and put it in. The h4 plug will plug directly into your existing sockets. That wire should come unhooked from the end that does not have the screw and hinge up. That plastic piece should come out and the bulb should go in there. rehook the wire and put the rubber boot on to protect it. (not sure what these guys are talking about, i only see 3 pics and they are all of the housing, don't see any wires.) I can get pics later tonight if you need them Hope this helps Last edited by chevyguy_72; 12-28-2005 at 10:16 AM.

12-27-2005, 07:20 PM	#2
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	Re: Help on my new Diamond Headlights 3 wires, high, low and common. Now comes the fun part - which is which? Is there a part number anywhere on them? __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

12-28-2005, 06:03 PM	#7
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Help on my new Diamond Headlights Yes, pics would be great. My mother-in-law got them from southern kentucky classics and they were for the 67-72 conversion. I've contacted them by email , but I'll call them and try to see if they can send me some info on them. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-28-2005, 06:25 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Help on my new Diamond Headlights Those look like my old ones that I had on my blazer quite awhile ago they sure did not work for me?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-28-2005, 10:50 PM	#10
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Help on my new Diamond Headlights Didn't come out too well. best I could get with them still in. Hope they help. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:31 PM.

12-28-2005, 11:54 PM	#11
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	Re: Help on my new Diamond Headlights chevyguy_72 said it correctly you have the wrong bulbs installed in the headlights, you need the H4 halogen bulbs installed in place of the ones currently in it and then your harness will plug right in. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

12-29-2005, 10:19 AM	#13
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Help on my new Diamond Headlights sorry no pics my ftp site was down all night hopefully it will be up tonight and i can upload them. The ones 68stepbed posted look the same as mine so hopefully they helped you.

12-29-2005, 01:54 PM	#14
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Re: Help on my new Diamond Headlights Again : from the pictures I see ; in Pic #2 the back of the light ,looks like you have to remove the spring clip and the white plastic and replace it with a 55/65 H4 bulb and install to your stock wiring . That is how mine worked , I just didn't have the plastic retainer . __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

12-29-2005, 02:03 PM	#15
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Help on my new Diamond Headlights Thanks guys plan on trying to knock it out tomorrow. Hey Craig-I don't want to hear about my gifts if I recall you had a little early Christmas gift that came from my neck of the woods. I can't exactly recall what it was, OH YEAH! A 2WD BLAZER!!!!!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-29-2005, 05:59 PM	#17
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Help on my new Diamond Headlights I have done the Headlight Relay Install. Will that enable me to use a bulb with more wattage? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-29-2005, 10:16 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Help on my new Diamond Headlights hey bud i thought i would let you know in my new summit catalog they have a new air filter top that matches your wheels. it is something different and looks pretty cool. if yah give a crap. __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

12-29-2005, 10:42 PM	#20
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Help on my new Diamond Headlights Bill, I just used the relay and my own wiring to do the upgrade. I'll see what kind of H4 bulbs they have at my local Advance. Hey Keith-I checked out the air filter assembly-WOW it's sweet but I don't think it's $191 WOW. Maybe I can find it somewherelse cheaper. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 12-29-2005 at 10:46 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.