new, used, some option, some blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-05-2006, 02:27 AM

Reply in thread, pay pal or $$ orders. I ship on Thursdays ONLY!! US only!!! I got more stuff I'll try to list on Sunday. If it doesn't sell on here by mid week its going on ebay unfortunately.
speed warning/tach set up, have wiring and buzzer. New bezel does not go with it, I'll install a used one. $475 plus shipping, its going on ebay Sunday evening
NOS swb top bed chrome, no clips $45 plus shipping-SOLD
NOS swb rear bottom bed chrome, in black $35 each plus shipping-SOLD
New never installed 67 sliding rear window, it does have some scratches on the metal from being moved around alot $80 plus shipping-SOLD
sandblasted metal 4x4 radiator tube $30 plus shipping
Thanks Randy

teeitup · 02-05-2006, 02:32 AM

blazer spring jack holders $20 shipped
blazer door caps, I think single wall $30 shipped
blazer door caps, I think double wall, has one crack in one, the other has a burn spot $25 shipped
blazer rear seat holddowns $55 shipped
blazer inner rear panel brackets $30 shipped for all in pic-SOLD

teeitup · 02-05-2006, 02:37 AM

new aftermarket lower black chrome, smaller pieces $20 each, door pieces $32 each-SOLD
blazer rear gate seal brackets $25 set shipped, one of the white ones is bent a little bit, blue ones are SOLD
72 chevy 4x4 front bumper brackets $40 plus shipping-SOLD
chrome door sills, like new $15 pair plus shipping-SOLD

HeavyD · 02-05-2006, 02:43 AM

I might be interested in some bedside chrome..is there a noticeable difference between the NOS and repo stuff, as far as weight or appearance is concerned? Does the NOS bedside chrome have any marks or dings? Thanks.
EDIT: Didn't see the no ship to Canada part. TTT for you

teeitup · 02-05-2006, 02:44 AM

Good tight original truck tilt column $230 plus shipping
blazer inside spare tire carrier $75 plus shipping
4x4 radiator shroud $40 plus shipping, I got 2 of these
NEW brake lines for a 72 4x4 blazer paid $180 sell for $100 plus shipping-SOLD

teeitup · 02-05-2006, 02:50 AM

blazer rear interior panel upright brackets $20 shipped
69-72 chevy front clip, fenders and rad support, NO RUST $300, NO SHIP
NEW shocks and blue covers, came with a 2 inch lift kit Tuff country $80 plus
shipping-SOLD
Another pic of tilt, steering wheel does not go with it
Thanks Randy

71jimmy · 02-05-2006, 03:47 AM

Randy, from the part numbers on the shocks they appear to be for a 2" lift, per the tuff country web site. Damn, Damn, Damn, I need the ones for 4-6" lift. TTT for ya.

BLAZERMAN · 02-05-2006, 09:23 AM

Randy, can you give me the length of the shocks.

webbes · 02-05-2006, 09:28 AM

Randy do you have all the brackets for the front 4x4 bumper. Bill
will take them if you do and still looking for the back also

teeitup · 02-05-2006, 10:16 AM

HeavyD, sorry I'm only shipping in US now
71jimmy, after I went to bed I got to thinking they were for a 2 inch lift
Rob, I'll get measurements
Webbes, they are yours, I need your zip. As for the the rear I got the 2 outside rear brackets is all, not the inside 2. $15 for the pair of outside ones. Thanks Randy

lutherb69 · 02-05-2006, 12:09 PM

On the tilt will it fit in a 68 burban ??

HOTFUN · 02-05-2006, 01:10 PM

Hi Randy
I'll take the NOS SWB upper chrome strip for $45. Can you give me an idea for shipping to me (68467) or are you coming up to Lincoln swap meet next month? I am in no hurry. Let me know and I will get you paid. Thanks, Mark

teeitup · 02-05-2006, 01:42 PM

lutherb69, yes it will bolt right in
Mark, I'll get shipping, I can't go anywhere for awhile, sorry
Thanks Randy

HeavyD · 02-05-2006, 06:50 PM

I am still interested in those swb mouldings and have a person in US willing to to store them for me. Will PM with details.

Geezer · 02-05-2006, 10:33 PM

Just to make sure, is the sliding back window for the small window?

teeitup · 02-06-2006, 12:14 AM

Hotfun, I'll get you a total Monday evening
HeavyD, they are for left and right side, I'll get you total Monday evening
Geezer, I sold it this morning, sorry
Everyone else so far the only things sold are
the SWB NOS top bed chrome and
the 2 NOS rear bed chrome
the 4x4 front bumper brackets
67 sliding rear window
Thanks Randy

ers13 · 02-06-2006, 01:46 AM

Randy,

If no one has spoken for the lower moldings I'll take them. Shipping to 22079? and let me know form of paymnet.

Thanks

Ed

teeitup · 02-06-2006, 09:22 AM

Ed, if your talking about the 6 new aftermarket ones, they are still available. I can get shipping price tonight. Thanks Randy

badpeanut · 02-06-2006, 09:26 AM

Quote:

blazer rear gate seal brackets $25 set shipped

I need a nice pair.

Could you describe the condition on the blue ones compared to the white ones?

Wes

teeitup · 02-06-2006, 09:28 AM

Wes, I think their good, let me look tonight. Thanks Randy

Blue4x4 · 02-06-2006, 09:48 AM

blazer inner rear panel brackets are they still available? PM me if so with your pay pal address. Thanks

teeitup · 02-06-2006, 02:04 PM

Yes they are available, I'll pm you. Thanks Randy

67ChevyRedneck · 02-06-2006, 02:33 PM

If there is no surface rust on the outer face of the door sills (there doesnt appear to be) I'll take the door sill pair. Shipping would be to Greer, SC 29650. Thanks.

Mint68 · 02-06-2006, 04:55 PM

Blazer spring jack holders.....
Is that the spring for the jack holddown the one that goes between the rear seat and the spare tire carrier or the one behind the drivers seat? The spring looks pretty long, and are booth brackets necessary? Also, how badly is the spring rusted?

teeitup · 02-06-2006, 09:21 PM

67chevy, I pm'd you total
Mint, I pm'd you back
Blue4x4, I pm'd you
Badpeanut, I pm'd you, blue set is best
ers13, I pm'd you a total if I got the right moldings
HeavyD, I pm'd you total
Hotfun, I pm'd you total
Webbes, I Pm'd you, need zip
Blazerman, 16 inch from center to center on the long ones compressed, 13 inch on the shorter ones compressed
Thanks so much, Randy

02-05-2006, 02:27 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	new, used, some option, some blazer parts Reply in thread, pay pal or $$ orders. I ship on Thursdays ONLY!! US only!!! I got more stuff I'll try to list on Sunday. If it doesn't sell on here by mid week its going on ebay unfortunately. speed warning/tach set up, have wiring and buzzer. New bezel does not go with it, I'll install a used one. $475 plus shipping, its going on ebay Sunday evening NOS swb top bed chrome, no clips $45 plus shipping-SOLD NOS swb rear bottom bed chrome, in black $35 each plus shipping-SOLD New never installed 67 sliding rear window, it does have some scratches on the metal from being moved around alot $80 plus shipping-SOLD sandblasted metal 4x4 radiator tube $30 plus shipping Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-11-2006 at 05:14 PM.

02-05-2006, 02:32 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts blazer spring jack holders $20 shipped blazer door caps, I think single wall $30 shipped blazer door caps, I think double wall, has one crack in one, the other has a burn spot $25 shipped blazer rear seat holddowns $55 shipped blazer inner rear panel brackets $30 shipped for all in pic-SOLD Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-11-2006 at 05:15 PM.

02-05-2006, 02:37 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts new aftermarket lower black chrome, smaller pieces $20 each, door pieces $32 each-SOLD blazer rear gate seal brackets $25 set shipped, one of the white ones is bent a little bit, blue ones are SOLD 72 chevy 4x4 front bumper brackets $40 plus shipping-SOLD chrome door sills, like new $15 pair plus shipping-SOLD Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-11-2006 at 05:16 PM.

02-05-2006, 02:43 AM	#4
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: new, used, some option, some blazer parts I might be interested in some bedside chrome..is there a noticeable difference between the NOS and repo stuff, as far as weight or appearance is concerned? Does the NOS bedside chrome have any marks or dings? Thanks. EDIT: Didn't see the no ship to Canada part. TTT for you __________________ "You can take the man out of PA, but you can't take PA out of the man" Last edited by HeavyD; 02-05-2006 at 03:21 AM.

02-05-2006, 02:44 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts Good tight original truck tilt column $230 plus shipping blazer inside spare tire carrier $75 plus shipping 4x4 radiator shroud $40 plus shipping, I got 2 of these NEW brake lines for a 72 4x4 blazer paid $180 sell for $100 plus shipping-SOLD Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-11-2006 at 07:41 PM.

02-05-2006, 02:50 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts blazer rear interior panel upright brackets $20 shipped 69-72 chevy front clip, fenders and rad support, NO RUST $300, NO SHIP NEW shocks and blue covers, came with a 2 inch lift kit Tuff country $80 plus shipping-SOLD Another pic of tilt, steering wheel does not go with it Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-11-2006 at 05:17 PM.

02-05-2006, 03:47 AM	#7
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Re: new, used, some option, some blazer parts Randy, from the part numbers on the shocks they appear to be for a 2" lift, per the tuff country web site. Damn, Damn, Damn, I need the ones for 4-6" lift. TTT for ya. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

02-05-2006, 09:23 AM	#8
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: new, used, some option, some blazer parts Randy, can you give me the length of the shocks. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

02-05-2006, 09:28 AM	#9
webbes Registered User Join Date: Oct 2005 Location: ILL. Posts: 129	Re: new, used, some option, some blazer parts Randy do you have all the brackets for the front 4x4 bumper. Bill will take them if you do and still looking for the back also

02-05-2006, 10:16 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts HeavyD, sorry I'm only shipping in US now 71jimmy, after I went to bed I got to thinking they were for a 2 inch lift Rob, I'll get measurements Webbes, they are yours, I need your zip. As for the the rear I got the 2 outside rear brackets is all, not the inside 2. $15 for the pair of outside ones. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2006, 12:09 PM	#11
lutherb69 Registered User Join Date: Oct 2005 Location: Langley AFB, Va (Army) Posts: 124	Re: new, used, some option, some blazer parts On the tilt will it fit in a 68 burban ??

02-05-2006, 01:10 PM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: new, used, some option, some blazer parts Hi Randy I'll take the NOS SWB upper chrome strip for $45. Can you give me an idea for shipping to me (68467) or are you coming up to Lincoln swap meet next month? I am in no hurry. Let me know and I will get you paid. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 02-05-2006 at 01:11 PM.

02-05-2006, 01:42 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts lutherb69, yes it will bolt right in Mark, I'll get shipping, I can't go anywhere for awhile, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2006, 06:50 PM	#14
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: new, used, some option, some blazer parts I am still interested in those swb mouldings and have a person in US willing to to store them for me. Will PM with details. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-05-2006, 10:33 PM	#15
Geezer Registered User Join Date: May 2005 Location: Spring Branch Texas Posts: 177	Re: new, used, some option, some blazer parts Just to make sure, is the sliding back window for the small window? __________________ If you can't drive it park it! If you can't park it milk it!



Register or Log In To remove these advertisements.

02-06-2006, 12:14 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts Hotfun, I'll get you a total Monday evening HeavyD, they are for left and right side, I'll get you total Monday evening Geezer, I sold it this morning, sorry Everyone else so far the only things sold are the SWB NOS top bed chrome and the 2 NOS rear bed chrome the 4x4 front bumper brackets 67 sliding rear window Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2006, 01:46 AM	#17
ers13 Registered User Join Date: Sep 2004 Location: Lorton, VA Posts: 33	Re: new, used, some option, some blazer parts Randy, If no one has spoken for the lower moldings I'll take them. Shipping to 22079? and let me know form of paymnet. Thanks Ed

02-06-2006, 09:22 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts Ed, if your talking about the 6 new aftermarket ones, they are still available. I can get shipping price tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2006, 09:28 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts Wes, I think their good, let me look tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2006, 09:48 AM	#21
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	Re: new, used, some option, some blazer parts blazer inner rear panel brackets are they still available? PM me if so with your pay pal address. Thanks

02-06-2006, 02:04 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts Yes they are available, I'll pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2006, 02:33 PM	#23
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: new, used, some option, some blazer parts If there is no surface rust on the outer face of the door sills (there doesnt appear to be) I'll take the door sill pair. Shipping would be to Greer, SC 29650. Thanks. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-06-2006, 04:55 PM	#24
Mint68 Registered User Join Date: Nov 2004 Location: Nebraska Posts: 762	Re: new, used, some option, some blazer parts Blazer spring jack holders..... Is that the spring for the jack holddown the one that goes between the rear seat and the spare tire carrier or the one behind the drivers seat? The spring looks pretty long, and are booth brackets necessary? Also, how badly is the spring rusted?

02-06-2006, 09:21 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: new, used, some option, some blazer parts 67chevy, I pm'd you total Mint, I pm'd you back Blue4x4, I pm'd you Badpeanut, I pm'd you, blue set is best ers13, I pm'd you a total if I got the right moldings HeavyD, I pm'd you total Hotfun, I pm'd you total Webbes, I Pm'd you, need zip Blazerman, 16 inch from center to center on the long ones compressed, 13 inch on the shorter ones compressed Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-06-2006 at 11:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.