what headers can i use on the dropped c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gostranger · 02-02-2006, 08:56 AM

have any of you guys used chevelle or camaro headers? i cant use truck headers because they are to low (hang down below the frame) i have a small block 327 i would like to run a longer header than a shorty may be a 3/4 lenght or a car full length does anyone have any suggestions or past experience let me know thanks

68cajun · 02-02-2006, 09:08 AM

I have the chevelle headers, i got them on e-bay for 180 shipped.

70c10 · 02-02-2006, 09:11 AM

Nice looking motor

What brand headers???

**special-K** · 02-02-2006, 09:15 AM

Yeah,tell us more.How`d they fit?There should be an application for lowered trucks made.

gostranger · 02-02-2006, 09:29 AM

nice looking motor!! who did you get them from on ebay those look nice!!

68cajun · 02-02-2006, 09:34 AM

Here is a set on e-bay now. From rodpartsdealer. I had to do a little grinding in the bolt holes to get them to fit right but no big deal. Mine are coated not chromed.

http://cgi.ebay.com/ebaymotors/SBC-C...QQcmdZViewItem

Putter · 02-02-2006, 10:41 AM

What kind of grinding?? Like elongate the holes? Do tell....

68cajun · 02-02-2006, 10:50 AM

Yeah i had to do 2 or 3 holes on each header. I used allen head bolts and still had a little trouble getting them in the holes and lined up with the head. At the most i had to elongate about a 1/16th.

gostranger · 02-02-2006, 11:45 AM

awesome 68cajun thanks for the help!!

76bonanza · 02-02-2006, 12:16 PM

Patriot makes a clipster header for small block it is a 3/4 lenght have not bought them but will more than likley use them. great for lowered trucks.

7deuce · 02-02-2006, 12:37 PM

I have the jet coated headers from early classic customs and there great. They should be for 400 bucks. I have my 72 c10 hammered and there is zero problems with them hitting anything. The only thing was when I Z'd the frame I moved the motor forward 3" so the header collector was not burried into the firewall which also prevented me from cutting the firewall for the HEI. The noly down fall was I had to get a new drive shaft.....

76bonanza · 02-02-2006, 02:20 PM

those ones from early classic look just like the clipsters by patriot that summit and jegs sells.

NPilot1975 · 02-02-2006, 03:16 PM

I have a set from Street and Performance that doesn't hang below the frame. I think the cost was around $400 and they are ceramic coated.

tom71 · 02-02-2006, 10:41 PM

im using dyno max chevelle shortys pn 289 86118 ceramic coated for 259 plus shipping i had them in 2 days from jegs they are 1 1/2 primaries and 2 1/2 collectors they sound small but its not going to make any diff on a street motor (between 1 1/2 and 1 5/8 primaries ) you can see a pic in the tubular trailing arm thread p.s. i didnt have to grind anything

68Stepbed · 02-03-2006, 08:26 PM

LUV2XLR8 bought some Hedman headers for GQ. I'm pretty positive they would work on a 2WD if you tucked the exhaust in the frame. Look at the pics in his sig and check em out.

Hey LUV what's the part # on them headers?

jhah71chevy · 02-04-2006, 01:16 AM

hedman pn 69640 black shorty
pn 69648 coated shorty
i have the black ones from o'reilly auto parts $198.99
jeremy

jsbgump · 02-04-2006, 02:47 AM

I have heard that 2nd gen camaro will work but they will interfear with the shift linkage

mike nutt · 02-04-2006, 09:14 AM

Quote:

Originally Posted by 68cajun

I have the chevelle headers, i got them on e-bay for 180 shipped.

68cajun what brakebooster/mastercylinder is that your running on your truck . i've got a setup off of '85 c/10 but haven't tried to mount it yet on my '69.

72chop · 02-04-2006, 08:50 PM

that set on ebay won't fit heads with angle plugs. does anyone know of a set that will? I have trick flow heads with angle plugs

68cajun · 02-04-2006, 09:54 PM

Quote:

Originally Posted by mike nutt

68cajun what brakebooster/mastercylinder is that your running on your truck . i've got a setup off of '85 c/10 but haven't tried to mount it yet on my '69.

It came off of a 96 GMC 2500, had to drill a couple of holes and weld the two rods together. Pretty simple install.

mike nutt · 02-05-2006, 10:14 AM

Quote:

Originally Posted by 68cajun

It came off of a 96 GMC 2500, had to drill a couple of holes and weld the two rods together. Pretty simple install.

thanks 68cajun

02-02-2006, 08:56 AM	#1
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	what headers can i use on the dropped c10 have any of you guys used chevelle or camaro headers? i cant use truck headers because they are to low (hang down below the frame) i have a small block 327 i would like to run a longer header than a shorty may be a 3/4 lenght or a car full length does anyone have any suggestions or past experience let me know thanks

02-02-2006, 09:08 AM	#2
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: what headers can i use on the dropped c10 I have the chevelle headers, i got them on e-bay for 180 shipped. Attached Images __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

02-02-2006, 09:11 AM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: what headers can i use on the dropped c10 Nice looking motor What brand headers??? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-02-2006, 09:15 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: what headers can i use on the dropped c10 Yeah,tell us more.How`d they fit?There should be an application for lowered trucks made. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-02-2006, 09:29 AM	#5
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: what headers can i use on the dropped c10 nice looking motor!! who did you get them from on ebay those look nice!!

02-02-2006, 09:34 AM	#6
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: what headers can i use on the dropped c10 Here is a set on e-bay now. From rodpartsdealer. I had to do a little grinding in the bolt holes to get them to fit right but no big deal. Mine are coated not chromed. http://cgi.ebay.com/ebaymotors/SBC-C...QQcmdZViewItem __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car Last edited by 68cajun; 02-02-2006 at 06:06 PM.

02-02-2006, 10:41 AM	#7
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: what headers can i use on the dropped c10 What kind of grinding?? Like elongate the holes? Do tell.... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-02-2006, 10:50 AM	#8
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: what headers can i use on the dropped c10 Yeah i had to do 2 or 3 holes on each header. I used allen head bolts and still had a little trouble getting them in the holes and lined up with the head. At the most i had to elongate about a 1/16th. __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car Last edited by 68cajun; 02-02-2006 at 10:51 AM.

02-02-2006, 11:45 AM	#9
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: what headers can i use on the dropped c10 awesome 68cajun thanks for the help!!

02-02-2006, 12:16 PM	#10
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: what headers can i use on the dropped c10 Patriot makes a clipster header for small block it is a 3/4 lenght have not bought them but will more than likley use them. great for lowered trucks. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

02-02-2006, 12:37 PM	#11
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: what headers can i use on the dropped c10 I have the jet coated headers from early classic customs and there great. They should be for 400 bucks. I have my 72 c10 hammered and there is zero problems with them hitting anything. The only thing was when I Z'd the frame I moved the motor forward 3" so the header collector was not burried into the firewall which also prevented me from cutting the firewall for the HEI. The noly down fall was I had to get a new drive shaft.....

02-02-2006, 02:20 PM	#12
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: what headers can i use on the dropped c10 those ones from early classic look just like the clipsters by patriot that summit and jegs sells. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

02-02-2006, 03:16 PM	#13
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: what headers can i use on the dropped c10 I have a set from Street and Performance that doesn't hang below the frame. I think the cost was around $400 and they are ceramic coated. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

02-02-2006, 10:41 PM	#14
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 436	Re: what headers can i use on the dropped c10 im using dyno max chevelle shortys pn 289 86118 ceramic coated for 259 plus shipping i had them in 2 days from jegs they are 1 1/2 primaries and 2 1/2 collectors they sound small but its not going to make any diff on a street motor (between 1 1/2 and 1 5/8 primaries ) you can see a pic in the tubular trailing arm thread p.s. i didnt have to grind anything Last edited by tom71; 02-02-2006 at 11:19 PM.

02-03-2006, 08:26 PM	#15
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: what headers can i use on the dropped c10 LUV2XLR8 bought some Hedman headers for GQ. I'm pretty positive they would work on a 2WD if you tucked the exhaust in the frame. Look at the pics in his sig and check em out. Hey LUV what's the part # on them headers? __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system



Register or Log In To remove these advertisements.

02-04-2006, 01:16 AM	#16
jhah71chevy Registered User Join Date: Apr 2005 Location: ENOREE,SC Posts: 27	Re: what headers can i use on the dropped c10 hedman pn 69640 black shorty pn 69648 coated shorty i have the black ones from o'reilly auto parts $198.99 jeremy __________________ JEREMY HUDSON

02-04-2006, 02:47 AM	#17
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: what headers can i use on the dropped c10 I have heard that 2nd gen camaro will work but they will interfear with the shift linkage __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-04-2006, 08:50 PM	#19
72chop Active Member Join Date: Feb 2000 Location: Douglasville Ga Posts: 126	Re: what headers can i use on the dropped c10 that set on ebay won't fit heads with angle plugs. does anyone know of a set that will? I have trick flow heads with angle plugs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.