2 inch lift on a 3/4 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gn4u2c* · 02-19-2006, 05:44 PM

I want to see a 2 inch with 33s on a 3/4 ton . I may be crazy but lift kits never seem to bring 3/4 tons up as much as halves maybe its in my mind ..... show me what ya got / brand.

JAKES 68GMC · 02-19-2006, 06:41 PM

You can fit 33" on a 3/4 ton without lift, if you have the right backspacing and rim width. I too am considering 2" lift on my truck with some 285's. I have 33 inch 7.00x17's on mine now. Not cool at all, but they do the job.

**special-K** · 02-19-2006, 11:52 PM

To be honest,I think it`s 2" higher than stock,but this is how it was when I got it.It`s add-a-leafs with 285/75x16s & 8"on the 2-tone.The front leals are straight.On the white one they are negative arched,original and possibly lower than new with 12.50/33x16.5s & 9.75" rims.

*gn4u2c* · 02-20-2006, 08:29 PM

mine with 33s on it now but i think it could use a little extra I'm famous for overloading trucks

and going were no 4x4 has gone beore

JAKES 68GMC · 02-20-2006, 11:49 PM

Looks like a good fit. Those 16.5 slots??

*gn4u2c* · 02-21-2006, 12:51 AM

yes they are I think a new set of mud terrains and 2 inches more I'm money !

02-19-2006, 05:44 PM	#1
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	2 inch lift on a 3/4 ton 4x4 I want to see a 2 inch with 33s on a 3/4 ton . I may be crazy but lift kits never seem to bring 3/4 tons up as much as halves maybe its in my mind ..... show me what ya got / brand. Last edited by gn4u2c; 02-20-2006 at 10:47 PM.

02-19-2006, 06:41 PM	#2
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: 2 inch lift on a 3/4 ton 4x4 You can fit 33" on a 3/4 ton without lift, if you have the right backspacing and rim width. I too am considering 2" lift on my truck with some 285's. I have 33 inch 7.00x17's on mine now. Not cool at all, but they do the job.

02-19-2006, 11:52 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2 inch lift on a 3/4 ton 4x4 To be honest,I think it`s 2" higher than stock,but this is how it was when I got it.It`s add-a-leafs with 285/75x16s & 8"on the 2-tone.The front leals are straight.On the white one they are negative arched,original and possibly lower than new with 12.50/33x16.5s & 9.75" rims. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-20-2006, 08:29 PM	#4
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	Re: 2 inch lift on a 3/4 ton 4x4 mine with 33s on it now but i think it could use a little extra I'm famous for overloading trucks and going were no 4x4 has gone beore Attached Images

02-20-2006, 11:49 PM	#5
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: 2 inch lift on a 3/4 ton 4x4 Looks like a good fit. Those 16.5 slots??

02-21-2006, 12:51 AM	#6
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	Re: 2 inch lift on a 3/4 ton 4x4 yes they are I think a new set of mud terrains and 2 inches more I'm money !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.