TOTM - Mar 06 - The Beasts

[Joe67]

I'll go first

Here is the 1967 C10 panel. Rust on every body panel.
327 V8
350 Auto trans

[Superron21]

Do I really need a description? A picture is worth a thousand words and the words I usually hear are "Dang that thangs a BEAST"! 1968 GMC 3/4 ton 4x4 283 4 speed 4.56 gears 6" lift 36" tires some rust but it just adds character.....NO power steering or Brakes - manual locking hubs - the front porch is made outta 1/2 plate (sticks out 13 inches) with an old power wagon winch, while out back is a 6" channel iron rear bumper with 6" clevises and my tow hook is from a 55 ton crane, its my "anti tailgater" deterent (sticks out 27 inches) and makes a handy counterweight (175 lbs) for when i stand on the front bumper to check the oil.....

[stan79chevy]

mines definately a beast. its a 79 chevy half ton 4x4. The entine is a rebuilt 350 bored .060 and done up a little, transmission is a th350 with TCI guts in it, the transfer case is a np205 out of a 70 blazer, the front axle is a dana 44 the rear is a 14 bolt ff 4.56 gears the axles came out of a 3/4 ton 77. the tires are 36.5x14.5x15 and it has no lift, i used a sawzall and trimmed the rust to make them fit. It is all one color rattle can black primer. Its mostly dents and rust. the only body mods ive done are put on a tailgate and grill from a 73 gmc.





stan

[HeavyD]

It will be tough to compete against you guys but here goes: 1971 C10, smoking 307, Th350, 3.07 rear. Was originally special order lime green, now pukey tan and brown paint on what little metal there is left. Steers and stops quite well actually but the carb is messed up and it needs an HEI. Other options are a shattered back window, no exhaust, many dangling wires, leaking ps hose, wooden steering wheel, and a funky smell inside (most likely mice). I bought it off a "friend" who was too scared to let his kid drive it, so of course I had to buy it and dump it at my brother's acerage to hibernate.