CAM CHANGE, can you pull the cam out without - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MylilBowTie · 03-23-2006, 02:37 AM

I would pull the engine out its not that hard to do. You can change it with the engine in the truck but you have to cut a beam in the core support (81-87) for the cam to come all the way out of the block.

Moostifer · 03-24-2006, 04:10 PM

Quote:

Originally Posted by MylilBowTie

I would pull the engine out its not that hard to do. You can change it with the engine in the truck but you have to cut a beam in the core support (81-87) for the cam to come all the way out of the block.

SO THAT'S WHY MINE IS CUT

makes since now! the guy that had it before me was half azz shade tree mek-a-nek.

03-23-2006, 02:37 AM	#1
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: CAM CHANGE, can you pull the cam out without I would pull the engine out its not that hard to do. You can change it with the engine in the truck but you have to cut a beam in the core support (81-87) for the cam to come all the way out of the block. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.