buddy buckets--- sort of - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 03-11-2006, 11:16 PM

these are 76 dodge buddy buckets( made by Bostrom) mounted on a 67-68 chevy buddy bucket frame. the frame had been lowered 2 inches by a previous owner, i used my original frame and had end plates made by a welding shop to bring it back to stock height.i know it's not original but for a custom it's fine. $300.00 plus shipping

**jerry moss** · 03-12-2006, 11:51 AM

the seats look crooked in the pic, they are in my storage unit and had a box sitting on them for several months until just before i snapped the picture. the frame was brought back to factory specs, including the bracing pipe that goes from side to side. all measurements were from one of my stock 67-68 buddy bucket seat frames and all bolt holes are in line with the cab floor holes.

**jerry moss** · 03-19-2006, 10:55 AM

250.00 plus ride ????????

**1970 CST Short Wide** · 03-19-2006, 12:58 PM

Morning Jerry

here's a TTT for ya

**jerry moss** · 03-19-2006, 01:37 PM

Steve,
thank you, hope all is well. i thought there would be more interest in these seats. they are actually more comfortable than 67-8 cst buckets. have a great day

ol yellow 72 · 03-19-2006, 02:03 PM

whats bottom dollar shipped to 40008?

bstack · 03-19-2006, 09:02 PM

What color are those and shipping to 43725.
Do you need any special brackets to mount
them?
Thanks Bruce!

ClemsonChevy · 03-19-2006, 09:30 PM

Quote:

Originally Posted by jerry moss

the seats look crooked in the pic, they are in my storage unit and had a box sitting on them for several months until just before i snapped the picture. the frame was brought back to factory specs, including the bracing pipe that goes from side to side. all measurements were from one of my stock 67-68 buddy bucket seat frames and all bolt holes are in line with the cab floor holes.

see above quote

mooneyes · 03-19-2006, 10:34 PM

......do the seats have any tears rips etc? and does the center fold down like the chevy one does? i would like to see more pics and get a shipping quote to 16057.......thank you

locab36 · 03-20-2006, 08:18 AM

Would stock 71 bucket seats bolt to this frame or has it been modified for the current seats? Do you have an idea on shipping to 48642. Would you sell just the frame and center console?

Thanks
John

72SUPER4X4 · 03-24-2006, 11:06 AM

Jerry, I had sent you a couple of PM's regarding these seats. Do you still have them? Please give me a shipping quote to 12491...
Thank you, Jeff

**jerry moss** · 03-24-2006, 11:14 AM

sorry i haven't replied back, tha seats are in my storage unit and i haven't had any time to weigh and measure them. i sent a set by truck freight several years ago to michigan and it was $130.00 and shipped in one piece. greyhound is over 30 miles from me but i'll check on their price.

locab36 · 03-24-2006, 04:19 PM

Thanks Jerry,

I guess I'm not interested in the buckets that much. I really need the seat frame and console/seat if you'll seperate.

John

03-11-2006, 11:16 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,863	buddy buckets--- sort of these are 76 dodge buddy buckets( made by Bostrom) mounted on a 67-68 chevy buddy bucket frame. the frame had been lowered 2 inches by a previous owner, i used my original frame and had end plates made by a welding shop to bring it back to stock height.i know it's not original but for a custom it's fine. $300.00 plus shipping Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 03-11-2006 at 11:24 PM.

03-12-2006, 11:51 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,863	Re: buddy buckets--- sort of the seats look crooked in the pic, they are in my storage unit and had a box sitting on them for several months until just before i snapped the picture. the frame was brought back to factory specs, including the bracing pipe that goes from side to side. all measurements were from one of my stock 67-68 buddy bucket seat frames and all bolt holes are in line with the cab floor holes. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-19-2006, 10:55 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,863	Re: buddy buckets--- sort of 250.00 plus ride ???????? __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-19-2006, 12:58 PM	#4
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Re: buddy buckets--- sort of Morning Jerry here's a TTT for ya __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

03-19-2006, 01:37 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,863	Re: buddy buckets--- sort of Steve, thank you, hope all is well. i thought there would be more interest in these seats. they are actually more comfortable than 67-8 cst buckets. have a great day __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-19-2006, 02:03 PM	#6
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 211	Re: buddy buckets--- sort of whats bottom dollar shipped to 40008?

03-19-2006, 09:02 PM	#7
bstack Registered User Join Date: Dec 2000 Location: cambridge,ohio Posts: 135	Re: buddy buckets--- sort of What color are those and shipping to 43725. Do you need any special brackets to mount them? Thanks Bruce! __________________ 70-Olds 442 66-Impala 4-dr. 67-K-10 87 Chev. 1/2 Ton 4x4 Swb

03-19-2006, 10:34 PM	#9
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	Re: buddy buckets--- sort of ......do the seats have any tears rips etc? and does the center fold down like the chevy one does? i would like to see more pics and get a shipping quote to 16057.......thank you __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

03-20-2006, 08:18 AM	#10
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: buddy buckets--- sort of Would stock 71 bucket seats bolt to this frame or has it been modified for the current seats? Do you have an idea on shipping to 48642. Would you sell just the frame and center console? Thanks John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

03-24-2006, 11:06 AM	#11
72SUPER4X4 Registered User Join Date: Mar 2002 Location: West Shokan, NY USA Posts: 25	Re: buddy buckets--- sort of Jerry, I had sent you a couple of PM's regarding these seats. Do you still have them? Please give me a shipping quote to 12491... Thank you, Jeff

03-24-2006, 11:14 AM	#12
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,863	Re: buddy buckets--- sort of sorry i haven't replied back, tha seats are in my storage unit and i haven't had any time to weigh and measure them. i sent a set by truck freight several years ago to michigan and it was $130.00 and shipped in one piece. greyhound is over 30 miles from me but i'll check on their price. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-24-2006, 04:19 PM	#13
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: buddy buckets--- sort of Thanks Jerry, I guess I'm not interested in the buckets that much. I really need the seat frame and console/seat if you'll seperate. John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.