A Little Help From Xxl Please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

justin · 09-29-2002, 05:00 PM

Hey If anyone knows how to use photo shop or any other program, Could you slam this truck and maybe chop a LITTLE off the top for me. I am trying to talk my father in law into laying this truck on the ground. I know its a f*rd but it is a very rare 61 Unibody truck with little rust. Thanks.

XXL · 09-29-2002, 07:50 PM

Here's a quick hack. BTW, there is no way in hell I'd go cutting on a '61 Uni-body. There hard to find, and there are people who are looking and willing to spend top dollar for a clean one.

Kenneth

justin · 09-29-2002, 08:19 PM

THANKS KENNETH
I told my father in law he could probably get a pretty penny for the old ford but he has had the truck for like 20 something years and will probably never sell it. He also has a 60 or 62 longbed unibody ford. I have seen a few of these trucks dropped and I think it would be sweet to lay one down on the ground.

Justin

justin · 09-30-2002, 11:30 AM

I messed around with my photo shop last for a couple hours, think I figured it out. Here is my Duallie with a slight drop.

Zumo · 09-30-2002, 11:46 AM

My version coming soon in a few minutes.......

Zumo · 09-30-2002, 12:11 PM

Here we go:

barn9 · 09-30-2002, 01:13 PM

This is blasphemy! You lay a f**d on the ground with a little gasoline and a match!

XXL · 09-30-2002, 06:00 PM

Hey, I hope you guys appreciated my one-piece windows

Kenneth

Crank · 09-30-2002, 06:23 PM

So, what do you call a huge drop, Justin???
Brandon

XXL · 09-30-2002, 07:24 PM

What about the top chop and shave?

Kenneth

justin · 09-30-2002, 08:19 PM

Man, I have got a lot of practicing to do!
I didn't notice the windows before but that is sweet!
How do you chop the top?And shave it?
Good work guys!

justin · 09-30-2002, 09:05 PM

Had to drop it a little more with the big rims!

low 84 · 09-30-2002, 09:29 PM

Quote:

Originally posted by justin
Had to drop it a little more with the big rims!

nice, you know your low when your tuckin' lugnuts

MandarinSixSeven · 09-30-2002, 11:30 PM

XXL
how do you actually make a selection, cut-it and then paste it in photoshop?
i can obviously make the selection with the lasso tool, but then i try to move it and it wont move...whats the deal?

mrein3 · 10-01-2002, 07:41 AM

After you lasso your selection you have to select edit -> copy (or just do a control-C).

Also make sure the layer you are selecting from actually contains what you are trying to cut/copy.

jay6891 · 10-01-2002, 07:59 AM

Man I didn't know there was a market for a unibody. Cleared some land a couple of years ago and there was one grown up in the trees. Used a d-3 and pushed it out of the way. We didn't hurt it so I may go out and look if it is still there. Dude that bought the property was gonna dig a hole and bury it along with some other junk.

Zumo · 10-01-2002, 10:53 AM

A nuthern'

brennecke · 10-01-2002, 12:18 PM

My turn to play

justin · 10-01-2002, 05:47 PM

AWSOME!!!!!!!!
Put some flames on the dually

09-29-2002, 05:00 PM	#1
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	A Little Help From Xxl Please Hey If anyone knows how to use photo shop or any other program, Could you slam this truck and maybe chop a LITTLE off the top for me. I am trying to talk my father in law into laying this truck on the ground. I know its a frd but it is a very rare 61 Unibody truck with little rust. Thanks. Attached Images __________________ FOUNDING MEMBER OF THE "O-SHT, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

09-29-2002, 07:50 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Here's a quick hack. BTW, there is no way in hell I'd go cutting on a '61 Uni-body. There hard to find, and there are people who are looking and willing to spend top dollar for a clean one. Kenneth Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

09-29-2002, 08:19 PM	#3
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	THANKS KENNETH I told my father in law he could probably get a pretty penny for the old ford but he has had the truck for like 20 something years and will probably never sell it. He also has a 60 or 62 longbed unibody ford. I have seen a few of these trucks dropped and I think it would be sweet to lay one down on the ground. Justin __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

09-30-2002, 11:30 AM	#4
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	I messed around with my photo shop last for a couple hours, think I figured it out. Here is my Duallie with a slight drop. Attached Images __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

09-30-2002, 11:46 AM	#5
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	My version coming soon in a few minutes....... __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

09-30-2002, 12:11 PM	#6
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Here we go: __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 10-04-2007 at 10:08 PM.

09-30-2002, 01:13 PM	#7
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	This is blasphemy! You lay a f**d on the ground with a little gasoline and a match! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

09-30-2002, 06:00 PM	#8
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Hey, I hope you guys appreciated my one-piece windows Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

09-30-2002, 06:23 PM	#9
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,964	So, what do you call a huge drop, Justin??? Brandon

09-30-2002, 07:24 PM	#10
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	What about the top chop and shave? Kenneth Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter Last edited by XXL; 09-30-2002 at 07:32 PM.

09-30-2002, 08:19 PM	#11
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	Man, I have got a lot of practicing to do! I didn't notice the windows before but that is sweet! How do you chop the top?And shave it? Good work guys! __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

09-30-2002, 09:05 PM	#12
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	Had to drop it a little more with the big rims! Attached Images __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

09-30-2002, 11:30 PM	#14
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	XXL XXL how do you actually make a selection, cut-it and then paste it in photoshop? i can obviously make the selection with the lasso tool, but then i try to move it and it wont move...whats the deal? __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

10-01-2002, 07:41 AM	#15
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	After you lasso your selection you have to select edit -> copy (or just do a control-C). Also make sure the layer you are selecting from actually contains what you are trying to cut/copy. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

10-01-2002, 07:59 AM	#16
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Man I didn't know there was a market for a unibody. Cleared some land a couple of years ago and there was one grown up in the trees. Used a d-3 and pushed it out of the way. We didn't hurt it so I may go out and look if it is still there. Dude that bought the property was gonna dig a hole and bury it along with some other junk. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.



Register or Log In To remove these advertisements.

10-01-2002, 10:53 AM	#17
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	A nuthern' __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 10-04-2007 at 10:08 PM.

10-01-2002, 12:18 PM	#18
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	My turn to play Attached Images __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

10-01-2002, 05:47 PM	#19
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	AWSOME!!!!!!!! Put some flames on the dually Attached Images __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.