Project Lemon Drop: anything but stock! - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 02-15-2010, 01:38 AM

Quote:

Originally Posted by west9378

Earlier it was stated that you filled or welded the rear cab roof seam can I ask why you did that and does it have any advantages.
Thank you in advance.

It was done purely to clean up the look of the cab. We did a lot of suttle changes to the truck, that only someone who is familiar with the style of truck will notice. The roof seam was just one of them

west9378 · 02-15-2010, 11:41 AM

Quote:

Originally Posted by jugernot

It was done purely to clean up the look of the cab. We did a lot of suttle changes to the truck, that only someone who is familiar with the style of truck will notice. The roof seam was just one of them

Thank you, I asked that because around the top of my back glass I have rust and I wanted to blame that seam for my problems.
Again thank you.

aggie91 · 02-16-2010, 03:22 PM

Your Truck looks outstanding. Looks like your on the down hill side for sure now.

Where/Who's bags/plates/cups did you use for your airbag set up?

Alan's Classic · 02-17-2010, 12:56 AM

Beautiful build you got there. Keep it up.

Aggie91 referred me over here. My fuel line from pump to carb has been giving me fits. I think I'm on the downhill side as far as the fuel line goes.

OARNGESI · 02-15-2010, 06:21 AM

Looks great

FRENCHBLUE72 · 04-15-2010, 08:36 PM

Are we done yet?

jugernot · 04-15-2010, 08:55 PM

Quote:

Originally Posted by FRENCHBLUE72

Are we done yet?

I wish. Just waiting my turn for a return visit to the LFD shop.

chevytruckluver · 06-10-2010, 10:56 PM

It's about time for an update!

NertiN · 08-02-2010, 02:36 PM

Nice project!!!

hotrodhomi · 08-02-2010, 04:05 PM

what's the next step?

jugernot · 08-02-2010, 05:18 PM

Sorry but still not much progress. I just had to buy a new fridge and it was not cheap. I had been working on completing the AC/Heater lines in the engine bay. Sounds easy right, NOT. I think I have it done, but I there may be some interference with the inner fender wells. So some modification may be in order.

I have also collected and stacked together the parts Kevin my need when he takes the truck to do some work. re-allign the front sheet metal, wet sand and polish the paint. complete the mess I made of the Painless harnress. Install the Accu-air control system, and what ever else I can convince him to do. I hope we can get it far enough to turn the engine over. I dieing to hear what that 327 sounds like with no exhaust. I hope after it gets back to my house, it will be just a matter of putting little bits back on.

Thanks for your interest and patients.

Rokcrln · 08-05-2010, 11:09 PM

Well you are off to a good start with a big box of brownie mix right on top for me! I am a bit behind as I just quit my regular job last monday and start the new company this next monday. So their will be a learning curve to work through but it will be worth in in the end. You want to hear it run, I want to see you try and look at it in the sun after a bit of cutting and polishing!!

Kevin
LFD Inc.

jugernot · 08-14-2010, 11:45 PM

I have read a couple of threads regarding registering a truck with a black and gold California license plates and how the DMV requires the plate to have a YOM sticker on it. Some time ago I bought a pair of CA commercial plates and after a little work I discovered that the first year the plate was registered was 1968 same as my truck. So hopefully things will go smooth when I try to register them to my truck.

I also have a pair of passenger vehicle plates that I will work on as well.

FRENCHBLUE72 · 08-15-2010, 10:55 AM

Im thinkin that if you show up in your work car and possibly work uniform I dont see how they could say no and if they do take them for a ride hahahahahaa

green68 · 09-17-2010, 02:36 PM

very nice

dutsuno · 09-19-2010, 05:00 PM

looks good!!

tranz am · 09-27-2010, 01:29 PM

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

jugernot · 09-27-2010, 11:50 PM

Quote:

Originally Posted by tranz am

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

Sounds good.

huero · 09-28-2010, 12:40 AM

Quote:

Originally Posted by tranz am

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

Tranz Am is your name Chuck?

tranz am · 09-28-2010, 01:13 AM

Nope. My name is Travis a.k.a. Greased Lightning, Tranz Am, and Northbay Street Machines. All me.

Quote:

Originally Posted by huero

Tranz Am is your name Chuck?

huero · 09-28-2010, 01:16 AM

o.k. Sorry. Have a friend in Santa Rosa with a Nova and truck same color as yours.

chevytruckluver · 01-30-2011, 03:13 AM

Hey...something fishy is going on there, are you sure Kevin is working? He does not seem to have moved in any one of the pics. Could he be sleeping under there? lol
Glad to see you getting back on this truck, looks like you guys got a few more things crossed off the list, keep at it!

**67cheby** · 01-31-2011, 10:31 AM

what electric fan set up are you running ?? and looking KILLER by the way

butternut1972 · 02-09-2011, 01:39 AM

Looks good, keep up the good work.

LooseCannon · 02-09-2011, 02:01 AM

Looks Great! Are your hood hinges anodized?

02-16-2010, 03:22 PM	#3
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Lemon Drop: anything but stock! Your Truck looks outstanding. Looks like your on the down hill side for sure now. Where/Who's bags/plates/cups did you use for your airbag set up? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-17-2010, 12:56 AM	#4
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Project Lemon Drop: anything but stock! Beautiful build you got there. Keep it up. Aggie91 referred me over here. My fuel line from pump to carb has been giving me fits. I think I'm on the downhill side as far as the fuel line goes. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-15-2010, 06:21 AM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Project Lemon Drop: anything but stock! Looks great __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

04-15-2010, 08:36 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Lemon Drop: anything but stock! Are we done yet? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-10-2010, 10:56 PM	#8
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Project Lemon Drop: anything but stock! It's about time for an update!

08-02-2010, 02:36 PM	#9
NertiN Registered User Join Date: Nov 2009 Location: Culiacan Sinaloa Mexico Posts: 13	Re: Project Lemon Drop: anything but stock! Nice project!!!

08-02-2010, 04:05 PM	#10
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Project Lemon Drop: anything but stock! what's the next step? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

08-02-2010, 05:18 PM	#11
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Sorry but still not much progress. I just had to buy a new fridge and it was not cheap. I had been working on completing the AC/Heater lines in the engine bay. Sounds easy right, NOT. I think I have it done, but I there may be some interference with the inner fender wells. So some modification may be in order. I have also collected and stacked together the parts Kevin my need when he takes the truck to do some work. re-allign the front sheet metal, wet sand and polish the paint. complete the mess I made of the Painless harnress. Install the Accu-air control system, and what ever else I can convince him to do. I hope we can get it far enough to turn the engine over. I dieing to hear what that 327 sounds like with no exhaust. I hope after it gets back to my house, it will be just a matter of putting little bits back on. Thanks for your interest and patients. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

08-05-2010, 11:09 PM	#12
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Lemon Drop: anything but stock! Well you are off to a good start with a big box of brownie mix right on top for me! I am a bit behind as I just quit my regular job last monday and start the new company this next monday. So their will be a learning curve to work through but it will be worth in in the end. You want to hear it run, I want to see you try and look at it in the sun after a bit of cutting and polishing!! Kevin LFD Inc.

08-14-2010, 11:45 PM	#13
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! I have read a couple of threads regarding registering a truck with a black and gold California license plates and how the DMV requires the plate to have a YOM sticker on it. Some time ago I bought a pair of CA commercial plates and after a little work I discovered that the first year the plate was registered was 1968 same as my truck. So hopefully things will go smooth when I try to register them to my truck. I also have a pair of passenger vehicle plates that I will work on as well. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 Last edited by jugernot; 08-14-2010 at 11:51 PM.

08-15-2010, 10:55 AM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Lemon Drop: anything but stock! Im thinkin that if you show up in your work car and possibly work uniform I dont see how they could say no and if they do take them for a ride hahahahahaa __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-17-2010, 02:36 PM	#15
green68 Registered User Join Date: May 2009 Location: cajun Posts: 42	Re: Project Lemon Drop: anything but stock! very nice

09-19-2010, 05:00 PM	#16
dutsuno Registered User Join Date: May 2010 Location: phoenix Posts: 52	Re: Project Lemon Drop: anything but stock! looks good!!

09-27-2010, 01:29 PM	#17
tranz am Registered User Join Date: Apr 2007 Location: Santa Rosa, Ca Posts: 586	Re: Project Lemon Drop: anything but stock! Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II. we might just have to hang out one of these days and shoot the snit. __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=456220 Best 1/4 mile time 12.1 @ 111 w/traction issues 1969 GMC SWB 1964 chevy II Nova ht Last edited by tranz am; 09-27-2010 at 01:30 PM.

09-28-2010, 01:16 AM	#21
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Project Lemon Drop: anything but stock! o.k. Sorry. Have a friend in Santa Rosa with a Nova and truck same color as yours.



Register or Log In To remove these advertisements.

01-30-2011, 03:13 AM	#22
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Project Lemon Drop: anything but stock! Hey...something fishy is going on there, are you sure Kevin is working? He does not seem to have moved in any one of the pics. Could he be sleeping under there? lol Glad to see you getting back on this truck, looks like you guys got a few more things crossed off the list, keep at it! __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-31-2011, 10:31 AM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Lemon Drop: anything but stock! what electric fan set up are you running ?? and looking KILLER by the way __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-09-2011, 01:39 AM	#24
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project Lemon Drop: anything but stock! Looks good, keep up the good work. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-09-2011, 02:01 AM	#25
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: Project Lemon Drop: anything but stock! Looks Great! Are your hood hinges anodized? __________________ Bagged 05 Suburban Bagged Baby Blue 68

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.