![]() |
![]() |
#1 |
Half a bubble off!
Join Date: Jun 2000
Location: Winfield, Ks, USA
Posts: 5,588
|
![]()
I have not been able to find a shorter riser to go in between the carb and air cleaner other than plastic rings without a breather tube fitting. I've seen them before, but do not know who the manufacturer is. Anyone know where I might find one? Appreciate any info, thanks, LB.
![]()
__________________
Just call me LB. ![]() '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
Vans have risers that are about 2" tall and there are lots of them!
If you can't find one, let me know. Jim |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Check Jegs.
http://www.jegs.com/ ![]() http://www.jegs.com/cgi-bin/ncommerc...38&prmenbr=361 I have one of these on my rig. |
![]() |
![]() |
![]() |
#4 |
Half a bubble off!
Join Date: Jun 2000
Location: Winfield, Ks, USA
Posts: 5,588
|
Thanks guys, I found one like those pictured in Andy's post today at a local parts store. Decided to eliminate the breather hose to the air cleaner, ordered a billet valve cover breather to match my valve covers. Damn, I'm not gonna be ashamed to open the hood anymore! Nothin' fancy, but it's definately the best the engine compartment has looked in the eleven years I've had the truck. Feels good, he-hee!
![]()
__________________
Just call me LB. ![]() '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|