A little progress today - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 01-02-2006, 06:30 PM

Kevin, that going to look great when done. I would think that grease, mud and oil would be less likely to stick to galvanized, probably a good rinse once in awhile would keep it looking like new.

**Hart_Rod** · 01-02-2006, 09:44 PM

Dude that rocks! I wish there was a place close to me that does that. If you wanted to paint over it, would the paint stick? Keep pics coming.

R

68cajun · 01-02-2006, 09:57 PM

That sure would be a nice frame for me to have here in south louisiana. Things rust pretty quick down here, and the frame looks simply awsome!

Sonny · 01-02-2006, 10:45 PM

Check this website out:

http://www.metalplate.com/

It looks like they could do the job.

Sonny

*Jr_Blazer_Boy* · 06-15-2006, 12:22 AM

any more progress on this? Would like to see pictures

nu2-72 · 06-15-2006, 05:34 PM

Cross members are in and she is on the rolling cart. Been working on the mechanicals. Engine is 90% and the front end is 90%. Have the last bedside to finish up and then start more body stuff. I will get some newer pics this week. Off all next week.

*Jr_Blazer_Boy* · 06-17-2006, 01:33 AM

Thanks

nu2-72 · 06-19-2006, 04:30 PM

Sorry for the delay. I am on vacation this week and have been working more on the shop than the truck.
I do have most of the bed done. One more bedside to prime and block out.
The shop is going to have a paint booth. Here are a few pics of what I did today. All corners are 45'd and will contain lights.

nu2-72 · 06-19-2006, 04:31 PM

Last one.

roj2323 · 06-19-2006, 10:39 PM

i never thought of galvanizing my frame but it's something i'm deffinitly going to look into. between galvanizing, dp-40 and paint i shold have little or no rust problems. cool!

ondrew

01-02-2006, 06:30 PM	#51
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: A little progress today Kevin, that going to look great when done. I would think that grease, mud and oil would be less likely to stick to galvanized, probably a good rinse once in awhile would keep it looking like new. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

01-02-2006, 09:44 PM	#52
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: A little progress today Dude that rocks! I wish there was a place close to me that does that. If you wanted to paint over it, would the paint stick? Keep pics coming. R __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-02-2006, 09:57 PM	#53
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: A little progress today That sure would be a nice frame for me to have here in south louisiana. Things rust pretty quick down here, and the frame looks simply awsome! __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

01-02-2006, 10:45 PM	#54
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	Re: A little progress today Check this website out: http://www.metalplate.com/ It looks like they could do the job. Sonny Last edited by Sonny; 01-02-2006 at 10:45 PM.

06-15-2006, 12:22 AM	#55
Jr_Blazer_Boy Account Suspended Join Date: Dec 2005 Location: Applegate Oregon Posts: 56	Re: A little progress today any more progress on this? Would like to see pictures

06-15-2006, 05:34 PM	#56
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: A little progress today Cross members are in and she is on the rolling cart. Been working on the mechanicals. Engine is 90% and the front end is 90%. Have the last bedside to finish up and then start more body stuff. I will get some newer pics this week. Off all next week. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-17-2006, 01:33 AM	#57
Jr_Blazer_Boy Account Suspended Join Date: Dec 2005 Location: Applegate Oregon Posts: 56	Re: A little progress today Thanks

06-19-2006, 04:30 PM	#58
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: A little progress today Sorry for the delay. I am on vacation this week and have been working more on the shop than the truck. I do have most of the bed done. One more bedside to prime and block out. The shop is going to have a paint booth. Here are a few pics of what I did today. All corners are 45'd and will contain lights. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-19-2006, 04:31 PM	#59
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: A little progress today Last one. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-19-2006, 10:39 PM	#60
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: A little progress today i never thought of galvanizing my frame but it's something i'm deffinitly going to look into. between galvanizing, dp-40 and paint i shold have little or no rust problems. cool! ondrew

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.