![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jun 2006
Location: Deer Park Texas
Posts: 5
|
![]()
I have a 1966 3/4 ton LWB fleetside. i want to convert it to 1/2 ton. I am going to by one of the disc brake kits for the front to convert to 5 lug. I want to lower it 4in in the front. In the rear I want to lower it 5 or 6in. Here is the question. Can I use the same rear end which has a 4.11 or 4.57 gear and just change out the axle shafts to a 5 lug? Where can I get some if I can? The rear end is good and I really don't want to buy the whole thing unless I have too. Any input would be great. Thank you
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: question about 1966 3/4 ton rear end
I am pretty sure the 3/4 ton rearend you have is a semi-floater... 1/2 ton axles will not interchange. You will need to swap the rearend.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|