The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Engine and Drivetrain

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 06-22-2006, 10:51 PM   #1
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Cadillac Eldorado-style caliper tech tip

Tech Tip
If you are using Cadillac Eldorado-style rear calipers (as we did), there are some important things you should know. These rear calipers adjust off the parking brake, which is incorporated into the caliper. You must set the parking brake every time you park the car so that you utilize a one-way clutch inside the caliper piston. When the parking brake is applied, the clutch senses when there is a 0.030-inch or greater clearance between the friction material and the rotor on the inboard side. When there is in excess of 0.030 inch, the clutch turns inside the piston, adjusting it out, keeping the rear brakes adjusted. If you do not set your parking brake every time, you will start to lose brake pedal (low and spongy) and the adjuster mechanism will not work.
Longhorn Man is offline  
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com