|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-11-2006, 01:58 PM
|
#1 |
|
Registered User
Join Date: Dec 2005
Location: Hopewell, Va
Posts: 3
|
It's hard to get it to stop!
Recently replaced the carb on my 86 GMC 305. Bought a rebuilt on line from Carbs Direct. Since I installed it on the engine diesels when you turn off the key. I've tried reseting the timing , and adjusting the carb with little or no change. Any ideas what might be wrong?
|
|
|
|
07-11-2006, 02:25 PM
|
#2 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: It's hard to get it to stop!
Sometimes run on occurs due to carbon in the combustion chamber creating hot spots. Try using some top end engine cleaner and see if that helps your problem.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
07-12-2006, 12:58 AM
|
#3 |
|
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
Re: It's hard to get it to stop!
Have you tried decreasing the idle speed?
|
|
|
|
|
07-12-2006, 10:47 AM
|
#4 |
|
Registered User
Join Date: Dec 2005
Location: Hopewell, Va
Posts: 3
|
Re: It's hard to get it to stop!
Haven't tried it yet, but will and let you know if it helps .Thanks
|
|
|
|
|
07-12-2006, 10:53 AM
|
#5 |
|
Registered User
Join Date: Dec 2005
Location: Hopewell, Va
Posts: 3
|
Re: It's hard to get it to stop!
Yes, not change. When I first put the carb on the engine the fast idle was way out of adjustment but I have that all strightened out.( I think) It 's worst after you've been running the A/C.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
