![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2006
Location: CA
Posts: 69
|
1970 heavy 1/2 ton
hey, guys i'm new here but i got a ? i have a 1970 2wd 1/2 ton with rear leaf springs and it all stock. in the glove department it says heavy duty rear suspention and heavy duty front suspention. when i was ordering bushings from energy suspention the dude said thats impossiable. and the rear leaf springs are the same a 4x4. so does any one have something like this, it has a 250 inline 6, 3 on the tree, and a 12 non-posi rear end.
thanks guys, darin _________________________ 70' c10 |
![]() |
![]() |
![]() |
#2 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 1970 heavy 1/2 ton
The leaf springs were standard on GMC and an option on chevy.The reverse is also true.Heavy duty is in relation to the capacity of the springs.The powertrain you have was base in all light trucks.There was a time(early to mid 80's I believe) when Chevy made a "Heavy Half"that was rated at 5/8 ton.If you can't figure it out to get them from Energy try one of the BB vendors since they can probably get your parts right the first time.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2006
Location: CA
Posts: 69
|
Re: 1970 heavy 1/2 ton
so does anyone have a pick up like mine just curious
1970 c10 with rear leafsprings not coil |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jan 2005
Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA
Posts: 2,097
|
Re: 1970 heavy 1/2 ton
from what ive been told i prob. have a HD 1/2 ton with coil. my drums are the bigger verision of the drums put on this truck.....i.e. the reason my 14x15 rims dont fit over the drums.
![]() |
![]() |
![]() |
![]() |
#5 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: 1970 heavy 1/2 ton
technicly, there is no HD 1/2 ton.
There were plenty made with leafs, and heavy springs. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|