ForSale: 4speed Truck Tilt & MSD6AL

[arkracing]

Yep you read right!!!

I got a 4 speed Truck Tilt here. I bought this off a fellow member almost 2 years ago. He had it rebuilt. It is very nice (but probably could use a quick paint job) It comes with 2 NEW levers (Turn Signal & Tilt). I bought it to use in my HotRod Ford - but have decided that it needs to go home to a nice fully optioned 4x4 4speed truck and not in a HotRod. I've only had it out of the box that it was shipped to me in twice - to take the pictures

Price = SOLD

Next is a BRAND NEW: MSD 6AL - this box has never been run with anything. It was mounted in my truck and the "rubber mounts" have a little Yellow primer on them - but will easily clean off with some Laquer thinner.

Note it is missing Harness PN# 8860 - this part is $11.88 @ Summit. (It is basically an extension from your MSD Dizzy to the Box. If you aren't using a MSD Dizzy - no big deal you don't need it.

Price for the MSD is $160 + Shipping

I don't want to sound like a jerk, but it seems that when selling on the boards everyone has thier own idea of how it works and who is in line:
so here how this is going to work according to how I want it to work:

If you want one of these items and are ready to purchase - no B.S. please. Then Post HERE first (get in line to appease everyone here) and then PM me.

Payments: PAYPAL or USPS Money Order only (Read - no Walmart, WesternUnion Etc.) or Cash. I prefer Cash and PayPal. There will be no exceptions!

Be Patient with me - I'm in and out all day/weekend. If you follow the instructions there is nothing to worry about

Here's the pictures:

[PICKMUP]

You don't need to tell us not to complain about prices...we all read the rules, too.

[arkracing]

Originally Posted by PICKMUP

You don't need to tell us not to complain about prices...we all read the rules, too.

Ok - Edited

I'm just trying to lay it out cause alot of times people don't read the rules or Newbie's come in with the "I was in line" BS

Sorry if I sound like a jerk about it - I just want to be fair in this.

[special-K]

Take anything on trade towards the tilt.I have some good stuff if you need anything.Or,are you truckless,now?(just saw your sig)

[arkracing]

Yeh I'm '67-72less Now. Sorry - I really need the Cash now.

I originally bought the Tilt for my HotRod Ford...not my Chevy P/U. But I found something that will work in the hot rod and figured I shouldn't waste one of these where it doesn't belong.


Lowered the price on the Tilt as I guess that I paid too much for it to begin with or nobody has $$$


I have a set of SBC motormounts for a 67-72:
$20 + the ride

Rear Taillamp Wiring harness for a Step Side:
$20 + the ride (these are like $80 New!!!)

BBC Valve Cover Spacers:
NEW NEVER INSTALLED - incase you want to run rollers with some short style covers. they are 1.150" high.
$100 + the ride.

I also have a '67-'68 396cid Block for a Manual Tranny Chevelle - 325Horse Option. It is standard bore and has been Align Honed, Cleaned, Magged. Ready for boring & decking. I have a BRAND NEW Gm NOS Forged & Nitrated crank to go with it as well. I have over $700 between the two.
$550 - Must be picked up. If you want Pictures PM me and I'll get some for you.

[special-K]

I`d buy that column,but have too many deals going at the moment.Would definately take it later if no one snags it.

[arkracing]

well I haven't had any interest in it other than you. How much later?
Let me know.

Thanks,
Andy

[Down south truckin]

whats that cover looking thing that is screwed to the lower portion of the column i've had a couple of these but dont remember seeing any thing like that on them thanks Mike

[arkracing]

Originally Posted by Down south truckin

whats that cover looking thing that is screwed to the lower portion of the column i've had a couple of these but dont remember seeing any thing like that on them thanks Mike

The black one with the screw in it?? - I think it is just an access cover of some type. Every 67-72 Column that I've had has had it on it.

The silver thing is the bearing retainer - they had springs on some of them as well

Honestly I'm not really sure. That is the way that I got the column - I only took it out of the box twice

[ChevyDude]

I have a question about the manual tilt....Is it 67-68 style or 69-72 style? It's my understanding that the 67-68 manual tilt was diiferent than the later manual tilts. Correct me if I'm wrong and if you know what year tilt it is???

Thanks
Alex

[NitroMike]

Andy,

Would you entertain an offer of $750 for the block (I assume that it is a 2-bolt), crank, and tilt? No shipping involved. I'd pick-up.

Let me know.

Thanks,

Mike D.

[special-K]

Some people say the tilts started in`68,but I always understood it to be`69.

[Don Loverink]

1968 trucks never had tillts in them......................

[ChevyDude]

So what the heck is CPP talking about:

http://www.classicperform.com/6092ch...&%20Components

maybe the 67-68 column is wired differently??? I didn't mean to HI JACK this thread either...just manual tilts are on the rare side.

[71meangreenc10]

Can you give me an idea on the price for the tilt now, Im in MD an can drive up there if its a good deal

[arkracing]

Originally Posted by NitroMike

Andy,

Would you entertain an offer of $750 for the block (I assume that it is a 2-bolt), crank, and tilt? No shipping involved. I'd pick-up.

Let me know.

Thanks,

Mike D.

I can't - I appreciate it, But I have way more invested in the three to lose that kind of $$$.

[arkracing]

Originally Posted by 71meangreenc10

Can you give me an idea on the price for the tilt now, Im in MD an can drive up there if its a good deal

Price is $400 now. From $450
I think it would be cheaper to have it shipped than gas.

[arkracing]

Really not sure what year it is guys. I don't know the differances.

[KSCHEVYUP]

[Arkracing I PM'd you] Ron

[arkracing]

PM returned

[Down south truckin]

i'm interested p/m sent thanks Mike

[NitroMike]

Andy,

Thanks anyway. Good luck.

Mike D.

[arkracing]

TILT SOLD