![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Oilfield Trash
Join Date: Sep 2003
Location: Raymore, Sk, Canada, Earth
Posts: 3,171
|
Need a measurement from someone with a sport bumper
Can someone with a sport bumper measure from the bottom of the tailgate to the bottom of the sport bumper, my truck is going in for exhaust but my bumper hasn't come in yet, so i need to know were to come out underneath the bumper, Thanks Guys!
__________________
14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Jul 2004
Location: Estherville, Iowa
Posts: 3,371
|
Re: Need a measurement from someone with a sport bumper
Just checked mine - 8 3/4 " from bottom of tailgate straight down to bottom of bumper, measured straight behind each frame rail, hope that helps.
There is a shot of the rear bumper here : http://67-72chevytrucks.com/vboard/s...d.php?t=201103
__________________
1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 Last edited by Green Machine; 08-04-2006 at 04:57 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2006
Location: Rogers, Arkansas
Posts: 52
|
Re: Need a measurement from someone with a sport bumper
8 inchs and a 1/4
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2006
Location: Rogers, Arkansas
Posts: 52
|
Re: Need a measurement from someone with a sport bumper
Yeah, bottom of tailgate to bottom of bumper: 81/4 inchs on my all across. No bends!!!
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
|
Re: Need a measurement from someone with a sport bumper
Just wait on your bumper to be 100% sure.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD |
![]() |
![]() |
![]() |
#6 |
Born Psycho
![]() Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,884
|
Re: Need a measurement from someone with a sport bumper
i work in a muffler shop (21+ years), wait on the bumper to get your exhaust done otherwise you are guessing too much on tip placement. the up/down measurement isn't the only measurement to consider, you've also got the in/out distance to think about.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|