|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-10-2006, 10:33 PM
|
#1 |
|
Registered User
Join Date: Nov 2005
Location: Denton,TX
Posts: 61
|
Firewall gutter shaving question?
I have rust on the upper edge of the wire gutter on the top of the firewall. When guys talk about shaving this portion of the firewall, do they actually trim this lip down to where it is flush. If so, what is the best way to go about this? Thanks
|
|
|
|
08-10-2006, 10:50 PM
|
#2 |
|
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: Firewall gutter shaving question?
Normaly they leave it their and cap off the top. If you cut it down you will end up having two different sections at the corner that will seperate and need to be welded and ground back down. Not the best way to go but not the end of the world eather. Here is one I just finished.
Kevin LFD Inc. |
|
|
|
|
08-10-2006, 11:12 PM
|
#3 |
|
Junior Member
 
Join Date: Sep 2005
Location: Fresno,California
Posts: 224
|
Re: Firewall gutter shaving question?
Kevin, that is some nice work. Have you ever done a firewall completely flat without the step where the gutter was?...................Flat 67
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
