|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-30-2006, 01:27 PM
|
#1 |
|
Licensed to Thrill!
Join Date: Apr 2006
Location: Northwest, GA
Posts: 1,673
|
How do you/can you remove the kick panel cowl vents?
I need to get them out if possible (or just the passenger side at least) to see if I can put a drain down through there for my under dash a/c and to make that go a little smoother. It would also be a good time to replace my seals on them.
Thanks in advance. |
|
|
|
08-30-2006, 02:02 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
Re: How do you/can you remove the kick panel cowl vents?
take the bracket handle loose. Open the vent as far as possible and at the bottom there should be a spring loaded pin (pivot point) which you need to push up on to clear the hole and tip out the vent door. If its rusted, spray with some wd-40.
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich |
|
|
|
|
09-02-2006, 12:41 PM
|
#3 |
|
Licensed to Thrill!
Join Date: Apr 2006
Location: Northwest, GA
Posts: 1,673
|
Re: How do you/can you remove the kick panel cowl vents?
That's what I thought...and what I have been trying...
Hmm... Thanks, gonna go try again. DLB |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
