'71/'72 Calipers/differences - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickup6772 · 10-18-2002, 11:52 PM

I HAVE A '71 FRAME UNDER MY '67 2WD LWB FLEETSIDE. WHEN I WENT TO PRICE OUT CALIPERS FOR IT, THE PRICES WERE RIDICULOUS!!!!! BUT IF I WANTED '72 CALIPERS, THE PRICES WERE IN LINE WITH MOST OTHER G.M. PRODUCTS. WHAT ARE THE DIFFERENCES BETWEEN THE TWO, AND CAN I USE THE '72 AND UP CALIPERS ON THE '71? ALSO, DOES ANYBODY KNOW IF ANYONE MAKES S/S BRAIDED BRAKE HOSES FOR OUR TRUCKS?? ANY INFO WOULD BE APPRECIATED. THANKS IN ADVANCE, MIKE

P.S. BTW, THE TRUCK IS A C/10. I DIDN'T SEE THIS OMISSION TILL I POSTED IT

crazy longhorn · 10-19-2002, 12:22 AM

the banjo fittings are different on the brake hoses,I ran into that problem on a 71. i could only find the later caliper,& had to change the brake hose to use it......I thought the swich over was 73, but its been a while. At any rate, the caliper fit.....just needed a different hose.......crazy longhorn

pickup6772 · 10-19-2002, 12:41 AM

THANKS, LONGHORN!!! I'M GOING TO REPLACE THE HOSES ANYWAY, SO THIS WILL SAVE ME SOME TIME AND AGGRAVATION. THANK YOU.

10-18-2002, 11:52 PM	#1
pickup6772 Registered User Join Date: Aug 2002 Location: MASTIC BEACH, long island, ny Posts: 362	'71/'72 Calipers/differences I HAVE A '71 FRAME UNDER MY '67 2WD LWB FLEETSIDE. WHEN I WENT TO PRICE OUT CALIPERS FOR IT, THE PRICES WERE RIDICULOUS!!!!! BUT IF I WANTED '72 CALIPERS, THE PRICES WERE IN LINE WITH MOST OTHER G.M. PRODUCTS. WHAT ARE THE DIFFERENCES BETWEEN THE TWO, AND CAN I USE THE '72 AND UP CALIPERS ON THE '71? ALSO, DOES ANYBODY KNOW IF ANYONE MAKES S/S BRAIDED BRAKE HOSES FOR OUR TRUCKS?? ANY INFO WOULD BE APPRECIATED. THANKS IN ADVANCE, MIKE P.S. BTW, THE TRUCK IS A C/10. I DIDN'T SEE THIS OMISSION TILL I POSTED IT Last edited by pickup6772; 10-18-2002 at 11:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2002, 12:22 AM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	the banjo fittings are different on the brake hoses,I ran into that problem on a 71. i could only find the later caliper,& had to change the brake hose to use it......I thought the swich over was 73, but its been a while. At any rate, the caliper fit.....just needed a different hose.......crazy longhorn

10-19-2002, 12:41 AM	#3
pickup6772 Registered User Join Date: Aug 2002 Location: MASTIC BEACH, long island, ny Posts: 362	THANKS, LONGHORN!!! I'M GOING TO REPLACE THE HOSES ANYWAY, SO THIS WILL SAVE ME SOME TIME AND AGGRAVATION. THANK YOU.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.