6-pack on a 6-71 Blower - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69cruiser · 09-09-2006, 11:02 PM

I had an interesting brainwave, I was thinking that a 6-pack(3x2bbl) would look awesome sitting on top of a 6-71 blower, but as far as i know, no one makes a kit to do this. Has anyone ever attempted this? or does anyone know of a company that makes/could make and adapter plate for this? Or how I could go about making my own?

Thanks,
Cory

*trkklr77* · 09-09-2006, 11:22 PM

not hard to do, just gona cost alot.

do you have any of the parts???

make a rubbing or cut out tagboard patter from the top of the blower and the top of a 3x2 intake, take them to a machine shop and say make it.

check into 3x2 for a tunnel ram intake, the top plate for it may swap over.

69cruiser · 09-09-2006, 11:27 PM

Don't have the parts yet, but should have them soon. Do you know anyone who makes a 3x2 tunnel ram? and besides this method, is there any other methods to do this? are there any companies that could CNC machine an adapter plate that could bolt onto the blower?

Cory

*trkklr77* · 09-09-2006, 11:44 PM

im not finding any yet, but im wondering if a 3x2 can even flow enough air to a feed blower.

PanelDeland · 09-10-2006, 12:05 AM

Should flow enough air.A single 4 bbl will.As far as it goes there are a lot of guys using sheetmetal intakes on engines these days.Probably be about as cheap to use an injector like on an old drag car.

69cruiser · 09-10-2006, 12:16 AM

actually about 5 minutes after making my last post, I found a company who makes an adapter plate that will bolt onto any 6-71 or 8-71 blower. The name of the company is "Hot Heads Reasearch and Racing Inc.".

http://www.hothemiheads.com/dodge/in...b_adapter.html

thanks for the help,

Cory

**N2TRUX** · 09-10-2006, 12:21 AM

This would look good under...er...through your hood...

**special-K** · 09-10-2006, 07:46 AM

Three dueces were run on blowers alot back before racing carbs.

*trkklr77* · 09-23-2006, 10:51 PM

thanks for that link, i found some useful stuff, [fingers crossed]

09-09-2006, 11:02 PM	#1
69cruiser user title? why? Join Date: Sep 2005 Location: Calgary, AB, Canada Posts: 92	6-pack on a 6-71 Blower I had an interesting brainwave, I was thinking that a 6-pack(3x2bbl) would look awesome sitting on top of a 6-71 blower, but as far as i know, no one makes a kit to do this. Has anyone ever attempted this? or does anyone know of a company that makes/could make and adapter plate for this? Or how I could go about making my own? Thanks, Cory

09-09-2006, 11:22 PM	#2
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: 6-pack on a 6-71 Blower not hard to do, just gona cost alot. do you have any of the parts??? make a rubbing or cut out tagboard patter from the top of the blower and the top of a 3x2 intake, take them to a machine shop and say make it. check into 3x2 for a tunnel ram intake, the top plate for it may swap over.

09-09-2006, 11:27 PM	#3
69cruiser user title? why? Join Date: Sep 2005 Location: Calgary, AB, Canada Posts: 92	Re: 6-pack on a 6-71 Blower Don't have the parts yet, but should have them soon. Do you know anyone who makes a 3x2 tunnel ram? and besides this method, is there any other methods to do this? are there any companies that could CNC machine an adapter plate that could bolt onto the blower? Cory Last edited by 69cruiser; 09-09-2006 at 11:31 PM.

09-09-2006, 11:44 PM	#4
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: 6-pack on a 6-71 Blower im not finding any yet, but im wondering if a 3x2 can even flow enough air to a feed blower.

09-10-2006, 12:05 AM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: 6-pack on a 6-71 Blower Should flow enough air.A single 4 bbl will.As far as it goes there are a lot of guys using sheetmetal intakes on engines these days.Probably be about as cheap to use an injector like on an old drag car. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-10-2006, 12:16 AM	#6
69cruiser user title? why? Join Date: Sep 2005 Location: Calgary, AB, Canada Posts: 92	Re: 6-pack on a 6-71 Blower actually about 5 minutes after making my last post, I found a company who makes an adapter plate that will bolt onto any 6-71 or 8-71 blower. The name of the company is "Hot Heads Reasearch and Racing Inc.". http://www.hothemiheads.com/dodge/in...b_adapter.html thanks for the help, Cory

09-10-2006, 12:21 AM	#7
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: 6-pack on a 6-71 Blower This would look good under...er...through your hood... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-10-2006, 07:46 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 6-pack on a 6-71 Blower Three dueces were run on blowers alot back before racing carbs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-10-2006 at 07:47 AM.

09-23-2006, 10:51 PM	#9
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: 6-pack on a 6-71 Blower thanks for that link, i found some useful stuff, [fingers crossed]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.