Rally wheels dont fit - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1970 CST Short Wide** · 09-27-2006, 04:30 PM

I'll have to look tonight

**special-K** · 09-27-2006, 09:27 PM

So,these are GM car rallyes and not Wheel Vintiques?

**1970 CST Short Wide** · 09-28-2006, 10:54 AM

Best guess is there the one on the left. I bought 5/16 spacers and that works. I have no idea who's wheels these are as they were given to me. I dont like the spacer deal so I'll be buying 2 correct wheels. I'm trying to decide if I want 8's or 10's on the front. I'll have 2 for sale soon LOL

**1970 CST Short Wide** · 09-28-2006, 01:15 PM

I did just score these though. All 4 for $60 and they are as perfect as perfect can be, the pic's dont do them justis. Some times you just get lucky

Longhorn Man · 09-28-2006, 04:40 PM

Were there any 5 lug corvette rallys made with the 5 on 5 bolt pattern? I'm thinking they were all 5 on 4 3/4

70short/step · 09-28-2006, 08:07 PM

Quote:

Originally Posted by Longhorn Man

Were there any 5 lug corvette rallys made with the 5 on 5 bolt pattern? I'm thinking they were all 5 on 4 3/4

Chevy never made any, but a lot of aftermarket manufacters do make them 5 on 5.
I have a set on my truck.

7387chevys · 09-28-2006, 08:40 PM

are 81-87s 5-on5 also?.......what backspacing is needed on 81-87s..........
linky to cheap wheels....... http://musclemotorsports.com/drivetr...up-5-on-5.html
Shane

Longhorn Man · 09-28-2006, 08:53 PM

all the full size 5 lug GM trucks are 5 on 5

**special-K** · 09-29-2006, 07:12 AM

That`s why I`m confused.I don`t know any reason there would be 5 lug truck wheels made with the drum brake profile

.

7387chevys · 09-29-2006, 07:41 AM

Quote:

Originally Posted by Longhorn Man

all the full size 5 lug GM trucks are 5 on 5

Yeehaw NASCAR wheels will work and can be gotten for 35-55 dollars depending on backspacing and width

Shane

Any one know what backspacing that these trucks require?

Longhorn Man · 09-29-2006, 05:10 PM

special-K, the old full size cars were 5 on 5 too.

LUV2XCLR8 · 09-29-2006, 05:38 PM

Quote:

Originally Posted by jimmydean

TYVM, That is really usefull

67ChevyRedneck · 10-24-2006, 04:57 PM

Quote:

Originally Posted by jimmydean

Bumping this one back to the top with some info:

Jimmydeans post was 100% correct (at least so far as my wheels go)

I used "unique wheel" corvette style rallys I bought off of Ebay on my truck. They are shaped like the picture on the right and they had a good 1/2" of clearance around the caliper. So if you've got a disk brake truck, check your rims before you buy (if you can).

*Billla* · 10-24-2006, 05:10 PM

Quote:

Originally Posted by QKENUF4U

who did you get the rims from ? i still need to get mine for the front but sure dont need more problems mounting them like i did the back.

I got mine from Wheel Vintiques and they fit my '72 with discs in front perfectly. The center caps fit from my '69 Vette rally wheels but I needed to buy their trim rings as well. They're a perfect fit IMHO; the Summit Racing link is below - I got these for $52 each.

http://store.summitracing.com/partde...0&autoview=sku

http://wheelvintiques.com/

**jerry moss** · 10-24-2006, 07:16 PM

i learned this lesson back in the late 70s. i bought a nice set of chrome rims with tires for my 73 chevy 1/2 ton 4x4 that came off a toyota landcruiser, i ran them down to a gas station where a buddy of mine was working and proceeded to bolt them up, dropped the truck down and tried to back it out of the stall. the front wheels wouldn't roll-oops. luckily the person i bought them from was nice enough to refund my money and i learned a valuable lesson.

hope everything works out for you Steve.

:hit:

09-27-2006, 04:30 PM	#26
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Re: Rally wheels dont fit I'll have to look tonight __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-27-2006, 09:27 PM	#27
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rally wheels dont fit So,these are GM car rallyes and not Wheel Vintiques? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-28-2006, 10:54 AM	#28
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Re: Rally wheels dont fit Best guess is there the one on the left. I bought 5/16 spacers and that works. I have no idea who's wheels these are as they were given to me. I dont like the spacer deal so I'll be buying 2 correct wheels. I'm trying to decide if I want 8's or 10's on the front. I'll have 2 for sale soon LOL __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-28-2006, 01:15 PM	#29
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Re: Rally wheels dont fit I did just score these though. All 4 for $60 and they are as perfect as perfect can be, the pic's dont do them justis. Some times you just get lucky Attached Images __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 Last edited by 1970 CST Short Wide; 09-28-2006 at 01:15 PM.

09-28-2006, 04:40 PM	#30
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Rally wheels dont fit Were there any 5 lug corvette rallys made with the 5 on 5 bolt pattern? I'm thinking they were all 5 on 4 3/4

09-28-2006, 08:40 PM	#32
7387chevys Registered User Join Date: Jun 2006 Location: WVa Posts: 758	Re: Rally wheels dont fit are 81-87s 5-on5 also?.......what backspacing is needed on 81-87s.......... linky to cheap wheels....... http://musclemotorsports.com/drivetr...up-5-on-5.html Shane

09-28-2006, 08:53 PM	#33
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Rally wheels dont fit all the full size 5 lug GM trucks are 5 on 5

09-29-2006, 07:12 AM	#34
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rally wheels dont fit That`s why I`m confused.I don`t know any reason there would be 5 lug truck wheels made with the drum brake profile . __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-29-2006, 05:10 PM	#36
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Rally wheels dont fit special-K, the old full size cars were 5 on 5 too.

10-24-2006, 07:16 PM	#40
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Re: Rally wheels dont fit i learned this lesson back in the late 70s. i bought a nice set of chrome rims with tires for my 73 chevy 1/2 ton 4x4 that came off a toyota landcruiser, i ran them down to a gas station where a buddy of mine was working and proceeded to bolt them up, dropped the truck down and tried to back it out of the stall. the front wheels wouldn't roll-oops. luckily the person i bought them from was nice enough to refund my money and i learned a valuable lesson. hope everything works out for you Steve. :hit: __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.