Advice on jack - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DanoDMano · 10-25-2002, 07:45 PM

Anyone out there know where I can get a jack that works with a 1970 chev?? Mine came without one and I am still driving without.Murpheys Law Clearly State's what is going to happen next.....

Any advice would be helpful....

bigvinnie · 10-25-2002, 07:53 PM

the factory jacks left much to be desired..... if you gotta have one, go ask on the parts board.... otherwise, a small hydraulic floor jack would be a better choice.

Alexis · 10-25-2002, 08:23 PM

i got one , how much do they run for, need some cleaning though. should i post some pics?

**truckster** · 10-25-2002, 10:47 PM

A bottle jack doesn't take up much space and can be pretty useful.

Mike C · 10-25-2002, 10:51 PM

I personally really like the factory jack... I even added one to my car trailers tool box. I have supplemented my OEM jack with a Hi-Lift in both my trucks as well. In the Jimmy mounted behind the seat, and in the truck mounted underneath the rail at the rear of the drivers side of the bed.

Longhorn Man · 10-25-2002, 11:49 PM

At Target you can get a gay lookin little bottle jack that does not weigh too much, will lift the truck high enough to do what needs to be done, (a 1/2 ton 2 wheel drive truck anyways) is 10 times more stable than a stocker, and comes in a little faggy plastic case.
I love mine.

Fred T · 10-26-2002, 12:22 AM

One problem with the bottle jacks is they usually don't get low enough when you need them most, especially if you're truck is lowered. Put an empty wheel on the front of your truck and set it on the ground. Then see how low of a jack you need. Ever try to find something for blocks so you can make a two step jack when you're stranded? It's not fun.

As for the factory jacks, I've change a lot of flats using them. Not the best by a long shot, but they will get the job done. Helps a lot to have a square of plywood to sit one on in the soft dirt.

DanoDMano · 10-26-2002, 12:23 AM

Hey Longhornman,
Im taking your advice and getting the one with the nice pretty bag....
I hope it comes in orange..

bobs409 · 10-26-2002, 07:43 AM

Quote:

Originally posted by longhornmail
At Target you can get a gay lookin little bottle jack that does not weigh too much, will lift the truck high enough to do what needs to be done, (a 1/2 ton 2 wheel drive truck anyways) is 10 times more stable than a stocker, and comes in a little faggy plastic case.
I love mine.

Ooh! With that description, im thinking of changing my jack now too!

Hee hee.

The 73-ups have a jack that might work too. These can usually be found easier. I carry a small floor jack on the passenger side floor. It's right next to my 4 way lug wrench and fire extinquisher! Be prepared.

10-25-2002, 07:45 PM	#1
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Advice on jack Anyone out there know where I can get a jack that works with a 1970 chev?? Mine came without one and I am still driving without.Murpheys Law Clearly State's what is going to happen next..... Any advice would be helpful.... __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

10-25-2002, 07:53 PM	#2
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	the factory jacks left much to be desired..... if you gotta have one, go ask on the parts board.... otherwise, a small hydraulic floor jack would be a better choice. __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

10-25-2002, 10:47 PM	#4
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,954	A bottle jack doesn't take up much space and can be pretty useful. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

10-25-2002, 10:51 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	I personally really like the factory jack... I even added one to my car trailers tool box. I have supplemented my OEM jack with a Hi-Lift in both my trucks as well. In the Jimmy mounted behind the seat, and in the truck mounted underneath the rail at the rear of the drivers side of the bed. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

10-26-2002, 12:22 AM	#7
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	One problem with the bottle jacks is they usually don't get low enough when you need them most, especially if you're truck is lowered. Put an empty wheel on the front of your truck and set it on the ground. Then see how low of a jack you need. Ever try to find something for blocks so you can make a two step jack when you're stranded? It's not fun. As for the factory jacks, I've change a lot of flats using them. Not the best by a long shot, but they will get the job done. Helps a lot to have a square of plywood to sit one on in the soft dirt. __________________ Fred There is no such thing as too much cam...just not enough engine.

10-25-2002, 08:23 PM	#3
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	i got one , how much do they run for, need some cleaning though. should i post some pics?

10-25-2002, 11:49 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	At Target you can get a gay lookin little bottle jack that does not weigh too much, will lift the truck high enough to do what needs to be done, (a 1/2 ton 2 wheel drive truck anyways) is 10 times more stable than a stocker, and comes in a little faggy plastic case. I love mine.

10-26-2002, 12:23 AM	#8
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Jack Hey Longhornman, Im taking your advice and getting the one with the nice pretty bag.... I hope it comes in orange.. __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.