|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-03-2006, 09:58 PM
|
#1 |
|
Registered User
Join Date: Nov 2000
Location: Manhatan,KS USA
Posts: 51
|
Intake Gasket Maker What Kind
I'm getting ready to replace my front and back intake gasket because of leakege and would like to know what RTV sealant to use. I have ultra black Hi-temp #598B- blue rtv 6b and would like to know which one is best to use. I also would like to know if I shoud use the clear rtv adhesive sealant on the intake bolt threads. I have a 350 with a weiand intake.
|
|
|
|
11-03-2006, 10:03 PM
|
#2 |
|
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: Intake Gasket Maker What Kind
I used the black for my intake. It worked beautifully with no leaks. I didn't use the gaskets for the front and rear; I've never had any luck with them so I just use RTV. Not sure about the clear for the bolts. I just cleaned the threads on mine before re-installing. Hope this helps.
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 Last edited by dave2953; 11-03-2006 at 10:05 PM. |
|
|
|
|
11-03-2006, 10:14 PM
|
#3 |
|
NCStroker
Join Date: Aug 2006
Location: NC
Posts: 89
|
Re: Intake Gasket Maker What Kind
heres a whole thread full of differing opinions...http://67-72chevytrucks.com/vboard/s...d.php?t=214085
__________________
1971 Chevy C/10-Built 383 Stroker 
|
|
|
|
|
11-04-2006, 01:13 AM
|
#4 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,648
|
Re: Intake Gasket Maker What Kind
I used Locktite #2 gasket sealant when I was having problems. No problem since......
 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
11-04-2006, 02:53 AM
|
#5 |
|
Registered User
Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
|
Re: Intake Gasket Maker What Kind
The ultra black is for use on gaskets that come in contact with oil-such as your intake. The blue is best for water.
|
|
|
|
|
11-04-2006, 05:51 AM
|
#6 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Intake Gasket Maker What Kind
The right stuff.
|
|
|
|
|
11-04-2006, 06:48 AM
|
#7 |
|
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: Intake Gasket Maker What Kind
Use the black for the intake ends. Get some liquid teflon sealant for the bolt threads.
__________________
"it's impossible to be surrounded by idiots when you are part of the circle"  2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
|
|
|
|
11-04-2006, 09:24 AM
|
#8 |
|
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,427
|
Re: Intake Gasket Maker What Kind
 I ALWAYS USE BLUE RTV SYLICON SEALENT & FEL-PRO GASKETS ON INTAKE MANIFOLDS & I ALWAYS SEAL THE THREADS WITH THE SAME SEALER I USE ON THE HEAD BOLTS. (IT KEEPS OIL FROM WORKING UP AROUND THE THREADS & LAYING ON YOUR INTAKE. JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE.  THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
|
|
|
11-04-2006, 09:51 AM
|
#9 |
|
Registered User
Join Date: Apr 2006
Location: southern Il
Posts: 335
|
Re: Intake Gasket Maker What Kind
do you have aluminuim or cast heads
It makes a difference on which type of thread sealant you use |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
