73+ Booster on older trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10-Driver · 11-13-2006, 11:04 PM

Glad to help...

I had a personal message and question from a board member about the proportioning valve on my truck. I couldn't figure out how to post a picture in a personal message so here goes...

I didn't really care for the "factory" position for the proportioning valve so I built a bracket and mounted it on the inner fender below the master cylinder.

Name: 70-C10_ProportioningValve.jpg
Views: 8627
Size: 63.6 KB

Name: 70-C10_ProportioningValve.jpg
Views: 8627
Size: 63.6 KB

In the newer trucks (73-87) it is mounted on the forward cross member right out of the way which I think I will do next to get it right out of the engine compartment.

...

11-13-2006, 11:04 PM	#8
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Brake Booster Question Glad to help... I had a personal message and question from a board member about the proportioning valve on my truck. I couldn't figure out how to post a picture in a personal message so here goes... I didn't really care for the "factory" position for the proportioning valve so I built a bracket and mounted it on the inner fender below the master cylinder. In the newer trucks (73-87) it is mounted on the forward cross member right out of the way which I think I will do next to get it right out of the engine compartment. ... __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.