SPID reprint - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chipflyer · 10-25-2006, 11:22 PM

Thanks Rod, I had some expert help!

Jeff

teeitup · 10-25-2006, 11:38 PM

Looks great Jeff!!!!!!! Your wife is right you are nuts!!!!!!!! LOL

**Canadian694x4** · 10-29-2006, 09:14 PM

Truely Amazing Work Chipflyer!

chipflyer · 10-30-2006, 09:08 PM

Thanks guys, I appreciate the comments. If anyone else needs one made shoot me a PM and I will explain the cost and process.

Jeff

timcos · 11-11-2006, 12:16 AM

I reeceived mine and they look even better in person. If you need one of these chipflyer is the guy to make you one.

I have never received such value for my money...in fact my money was worthless next to my new SPID.

1969k10stepside · 11-11-2006, 12:26 AM

I might need you to make me one in the future for my swb K10.It will be awhile till I am ready but it wont be that long.Looks like great work.

chipflyer · 11-13-2006, 05:41 PM

Not a problem Dustin, shoot me a note when your ready.

I am glad you are happy with the label Tim, I wouldn't think of selling them to others if I didn't think they were right on.

Jeff

67ChevyRedneck · 11-13-2006, 06:08 PM

Chipflyer:

I'd be interested in having one made someday... Not sure how to post pics in PM, so here's mine, it's REALLY long

BUT it does have some oddities at the top....

1969k10stepside · 11-13-2006, 06:13 PM

Wow,Your truck is loaded with options

I will send you a pm Jeff when I have found where the glovebox door is and see how much it will cost me.It had alot of options so it will be some work to get them all typed up....

timcos · 11-14-2006, 12:37 AM

I repeat...I am very impressed with mine. I am pretty good with some things...and I recognize quality when I see it. I know a lot of hard work to match letters has happened.

Rokcrln · 11-14-2006, 01:21 AM

Personaly I think it would be cool to have one made for how the truck is built now. New motor ID, 4 wheel disk, AOD, new paint code, tire size, re-born on date and so on as well as who the builder is. Just a thought but that is how I would go.

Kevin
LFD Inc.

chipflyer · 11-16-2006, 09:07 PM

Quote:

Chipflyer:

I'd be interested in having one made someday... Not sure how to post pics in PM, so here's mine, it's REALLY long BUT it does have some oddities at the top....

That is an odd one, the label is actually layed out a little differently.

1969k10stepside · 11-16-2006, 09:09 PM

I still havent got pics of the label for you.Its been raining nonstop so when it quits which it should tomorrow I will take one.

rodstored-72 · 11-17-2006, 12:12 AM

i am withrokcrln,
i think it would be cool to have one that has all the "options" that was built back into the truck. either way it is something cool that is being made. i would like to have it done for me as well. i just might do two - 1 for real & 1 like mentioned above. i likey alot!!!

rodstored-72

67ChevyRedneck · 11-17-2006, 09:35 AM

Quote:

Originally Posted by chipflyer

That is an odd one, the label is actually layed out a little differently.

Yes it is! I keep meaning to take better pics to send to you but I keep forgetting...

That does look sweet though! Money is tight until the end of the month, but I do want one!

67ChevyRedneck · 11-17-2006, 09:43 AM

Also under my VIN there are numbers typed there.... Here's a quote from my other thread:

Quote:

Mine said: 7.0.4..1.1.5... I'm pretty sure those dots were typed after the numbers, pretty hard to read. I think the wheelbase is 115, but that is probably just a coincidence. Not sure what the numbers mean.

Here's the thread. Someone mentioned that 67 "stickers" were a little different that the 68-newer ones.

http://67-72chevytrucks.com/vboard/s...optioned+truck

Orange · 11-17-2006, 03:04 PM

Mine had the original SPID with the plastic still on it before it went in for paint.
The crackheads just ripped it off when they painted my glove box and threw it away aside from my request not too.

No build sheet in the seat either. Don't know where it went...it was gone when I got the truck.

All I got is the VIN Plate on the door. Bummer.

10-25-2006, 11:22 PM	#26
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprint Thanks Rod, I had some expert help! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

10-25-2006, 11:38 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: SPID reprint Looks great Jeff!!!!!!! Your wife is right you are nuts!!!!!!!! LOL __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-29-2006, 09:14 PM	#28
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: SPID reprint Truely Amazing Work Chipflyer! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-30-2006, 09:08 PM	#29
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprint Thanks guys, I appreciate the comments. If anyone else needs one made shoot me a PM and I will explain the cost and process. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

11-11-2006, 12:16 AM	#30
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: SPID reprint I reeceived mine and they look even better in person. If you need one of these chipflyer is the guy to make you one. I have never received such value for my money...in fact my money was worthless next to my new SPID. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004) Last edited by timcos; 11-11-2006 at 12:32 AM.

11-11-2006, 12:26 AM	#31
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: SPID reprint I might need you to make me one in the future for my swb K10.It will be awhile till I am ready but it wont be that long.Looks like great work.

11-13-2006, 05:41 PM	#32
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprint Not a problem Dustin, shoot me a note when your ready. I am glad you are happy with the label Tim, I wouldn't think of selling them to others if I didn't think they were right on. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

11-13-2006, 06:08 PM	#33
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: SPID reprint Chipflyer: I'd be interested in having one made someday... Not sure how to post pics in PM, so here's mine, it's REALLY long BUT it does have some oddities at the top.... Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-13-2006, 06:13 PM	#34
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: SPID reprint Wow,Your truck is loaded with optionsI will send you a pm Jeff when I have found where the glovebox door is and see how much it will cost me.It had alot of options so it will be some work to get them all typed up.... Last edited by 1969k10stepside; 11-13-2006 at 06:16 PM.

11-14-2006, 12:37 AM	#35
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: SPID reprint I repeat...I am very impressed with mine. I am pretty good with some things...and I recognize quality when I see it. I know a lot of hard work to match letters has happened. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004) Last edited by timcos; 11-14-2006 at 09:49 AM.

11-14-2006, 01:21 AM	#36
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: SPID reprint Personaly I think it would be cool to have one made for how the truck is built now. New motor ID, 4 wheel disk, AOD, new paint code, tire size, re-born on date and so on as well as who the builder is. Just a thought but that is how I would go. Kevin LFD Inc.

11-16-2006, 09:09 PM	#38
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: SPID reprint I still havent got pics of the label for you.Its been raining nonstop so when it quits which it should tomorrow I will take one.

11-17-2006, 12:12 AM	#39
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,008	Re: SPID reprint i am withrokcrln, i think it would be cool to have one that has all the "options" that was built back into the truck. either way it is something cool that is being made. i would like to have it done for me as well. i just might do two - 1 for real & 1 like mentioned above. i likey alot!!! rodstored-72

11-17-2006, 03:04 PM	#42
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: SPID reprint Mine had the original SPID with the plastic still on it before it went in for paint. The crackheads just ripped it off when they painted my glove box and threw it away aside from my request not too. No build sheet in the seat either. Don't know where it went...it was gone when I got the truck. All I got is the VIN Plate on the door. Bummer. __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.