Core Support - repair or repop ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

409biscayne · 11-21-2006, 09:48 PM

What's your experience with aftermarket 72 core supports ? I need to do a little rust repair ( battery side ) on mine , plus sand blast and paint , might be cheaper to just replace . Whatta y'all think .
Tks ......................................... 409

Sweet72 · 11-21-2006, 09:50 PM

Depends on if you have welding equip. I made a patch to replace the rusted area under the battery and sandblasted & painted mine, but then GMC supports are harder to find. Never used a repro support so can't comment on them.

msgross · 11-21-2006, 10:03 PM

I know truckandcarshop had them at our last swap meet for $125 so it seemed like a good deal.

Green Machine · 11-21-2006, 10:15 PM

There is a patch panel available for the battery rust, I have done both ways and I would either fix the original, find a better original, last resort would be a repop, they take some work to get to fit, they are ok, just not an exact replica.

*72CSTC5* · 11-21-2006, 11:10 PM

Just make a patch and repair your own. Not very hard. Here is what I did.

11-21-2006, 09:48 PM	#1
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Core Support - repair or repop ? What's your experience with aftermarket 72 core supports ? I need to do a little rust repair ( battery side ) on mine , plus sand blast and paint , might be cheaper to just replace . Whatta y'all think . Tks ......................................... 409 __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)

11-21-2006, 09:50 PM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Core Support - repair or repop ? Depends on if you have welding equip. I made a patch to replace the rusted area under the battery and sandblasted & painted mine, but then GMC supports are harder to find. Never used a repro support so can't comment on them. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

11-21-2006, 10:03 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Core Support - repair or repop ? I know truckandcarshop had them at our last swap meet for $125 so it seemed like a good deal.

11-21-2006, 10:15 PM	#4
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Core Support - repair or repop ? There is a patch panel available for the battery rust, I have done both ways and I would either fix the original, find a better original, last resort would be a repop, they take some work to get to fit, they are ok, just not an exact replica. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

11-21-2006, 11:10 PM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Core Support - repair or repop ? Just make a patch and repair your own. Not very hard. Here is what I did. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.