![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Disc/Drum prop valve hook up? Pics?
So I got some discs and didn't have the right valve. So then I got a valve/bracket/lines for mounting it, but now it looks like the lines from the valve to the brakes are all wrong.
So do I need to get new lines for the front too? It looks like on in the front and one out the back where as my old setup was both lines out the bottom. Pics would be great. Thanks. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2002
Location: central pa
Posts: 1,525
|
Re: Disc/Drum prop valve hook up? Pics?
'71/'72 were like this. Back of MC to front prop valve. Front MC to back prop valve.
__________________
72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne |
![]() |
![]() |
![]() |
#3 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Disc/Drum prop valve hook up? Pics?
Dave, I have the same bracket and valve (1/2 ton) that's in dwaight72's pic. I hooked up my front line last night with a 1/4" to 3/16" brake line reducer fitting. I still have to hook up the rear line that goes on the back end of the valve. I'm going to see if I can get by with a 8" section of 1/4" brake line to connect my existing line to the back of the valve. I got my setup at a junkyard for $5.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: Disc/Drum prop valve hook up? Pics?
Thanks to you both. Looks like a short section and some reducers are in order. I hope to get everything plumbed this weekend, but I doubt I will get everything bled because I need to finish the rear bags.
|
![]() |
![]() |
![]() |
#5 |
member #16
![]() Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Disc/Drum prop valve hook up? Pics?
Also the lines are different between 1/2 and 3/4 ton from M/C to prop valve
1/2 ton - front to front rear to rear 3/4 - ton front to rear rear to front
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors ![]() http://www.flickr.com/photos/1745471...7602865984234/ |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|