|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-08-2002, 05:09 PM
|
#1 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Steering box part numbers
Long shot but thought maybe someone could tell me if this power steering box is original to my '69 C-10. It has #7802644 on it.
I suspect it isn't original as it seems like a tighter ratio than what a stock box of '69 might be.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
11-08-2002, 07:13 PM
|
#2 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
all 68-76 use that box casting. and the same box is on this 74 C20 out here and i dont have any 77-79 boxes to look on and see if are same, but only difference is input size after 76 through 79 then casting change in 80
what size steering wheel you got ? Last edited by Fast68Chevy; 11-08-2002 at 07:15 PM. |
|
|
|
|
11-09-2002, 10:42 AM
|
#3 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Thanks fast 68. Maybe it is my steering wheel that's helping. It's about 14 inches in diameter.
Alot was changed on my truck by a previous owner so I thought maybe the box was too.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
