Tall Valve Covers Won't Fit!! What R my options????

[PICKMUP]

Change to a 67-70 DD booster like this. It is a couple inches smaller and works great...
These are a "must" when trying to get clearance for 4bbl on a six cyl.

[[ol'Blue]]

What color is that blue?

[rage'nrat638]

how much $$$ frank ?

[jkade]

Originally Posted by PICKMUP

Change to a 67-70 DD booster like this. It is a couple inches smaller and works great...
These are a "must" when trying to get clearance for 4bbl on a six cyl.

Do you have a part # and where to get that setup?
You have got to love this Board.

[jkade]

ttt....

[rage'nrat638]

i suppled a link to buy the booster..

place a WTB on the parts board to find the brackets..

save the picture and post it with the WTB post

[jkade]

Originally Posted by rage'nrat638

i suppled a link to buy the booster..

place a WTB on the parts board to find the brackets..

save the picture and post it with the WTB post

Thanks for the help. I am going to see what the junk yard has in the line of hydraboost in a hour or so I may go that route since the cam I am running is so big.
Thanks, Kade

[jkade]

I ended up going to the junk yard and getting a hydraboost off a 88-94 chevy 3500. The ps pump off the brackets i bought are for a hydraboost. I figured this would be a little better performing since I am running a large cam and 4 wheel disc.

[rage'nrat638]

thats cool ...post some pictures of the goods if you don't mind, i will file them so's we can help the next member..
your pal mark

[jkade]

Originally Posted by rage'nrat638

thats cool ...post some pictures of the goods if you don't mind, i will file them so's we can help the next member..
your pal mark

I will take some over the weekend. I am going to have to make a new mounting plate and extend the rod but it sholdn't be too bad and I think it will look good with the modern serp setup.
Thanks again, Kade

[jkade]

Is anyone else running a late model setup with the plastic resivor? Pics?

[jkade]

The setup I bought was way more than easy to get bolted the firewall. All I had to do was take the factory plate off and turn it upside down and mark two new holes from the factory bracket and drill. I then had to make the hole in the firewall bid enough for the unit to slide in. The last was to shorten the new rod and I just cut it off and welded the threaded end of the old rod on and I was done. I will get pics the next time I have the camera with me.