Help With Wires Under Hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*stepside68* · 11-14-2002, 11:01 PM

the black wire that goes down the back side of motor on the passger side it is just a ground wire right

*stepside68* · 11-14-2002, 11:22 PM

it is dummy light truck no gauges

Longhorn Man · 11-15-2002, 12:03 AM

Where does it go to and come from? I can't think of any black wires...let alone in that location. All teh grounds should be braided steel straps...no actual wires.
The only Wire I can think of back there would be the purple wire going to the starter...or maybe the yellow one, also to the starter.

*stepside68* · 11-15-2002, 01:05 AM

it is with the green one and it look black i got the two you talking about they are in sepet wrap

bobs409 · 11-15-2002, 12:21 PM

Does the truck have AC? I think a green wire is used for that and there would also be a seperate black wire too.

Just a guess...

Long Knight · 11-15-2002, 01:05 PM

Are all of your gages working? I have a black wire running to my oil pressure sensor. The only other black wire I have is the one going to my elec. choke.

11-14-2002, 11:01 PM	#1
stepside68 Account Suspended Join Date: Feb 2002 Location: Jonesville NC Posts: 149	Help With Wires Under Hood the black wire that goes down the back side of motor on the passger side it is just a ground wire right

11-15-2002, 12:21 PM	#5
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Does the truck have AC? I think a green wire is used for that and there would also be a seperate black wire too. Just a guess... __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

11-15-2002, 01:05 PM	#6
Long Knight Spank 'em if you got 'em! Join Date: Nov 2002 Location: Kansas City Posts: 628	Are all of your gages working? I have a black wire running to my oil pressure sensor. The only other black wire I have is the one going to my elec. choke. __________________ Long Knight '71 C-20, 350ci, TH350, Edl. 1406 Carb w/elec.choke, Ignitor ignition, Viper Tires, Orange Dipstick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-14-2002, 11:22 PM	#2
stepside68 Account Suspended Join Date: Feb 2002 Location: Jonesville NC Posts: 149	it is dummy light truck no gauges

11-15-2002, 12:03 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Where does it go to and come from? I can't think of any black wires...let alone in that location. All teh grounds should be braided steel straps...no actual wires. The only Wire I can think of back there would be the purple wire going to the starter...or maybe the yellow one, also to the starter.

11-15-2002, 01:05 AM	#4
stepside68 Account Suspended Join Date: Feb 2002 Location: Jonesville NC Posts: 149	it is with the green one and it look black i got the two you talking about they are in sepet wrap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.