Finally got done with my drop...pics inside

[pcmcobra]

Originally Posted by boxrodz

In a previous thread, I think pcmcobra said that he's running 245/40s up front and 295/40s out back.

Ditto on the side shots...

roger that
on a side note, after I got alignment done...I noticed they had gouged the lip of my wheels. I was "off the hook", so to speak. Anyway, long story short, I'll be getting some new wheels.


The only problem I ran into was the spring plate and the shock mount really close. I took the spring plate to my bench grinder, just the right width, notched a little bit, and fits like a glove. And if you are using drop shocks, don't use the shock relocators... Just an FYI, or you will be taking everything off the rear, and reassembling without them...DOH!
First off, the drop shocks are too short w/ shock relocators, second off the shock relocator on my kit...is actually too wide for the shock, you could "bend" it I guess, but looks like, well, you bent it...