Post up a picture of your plug wires! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sport/Truck · 02-08-2007, 09:39 PM

I just ordered my Whites Performance dizzy today.

I’m assuming you guys aren’t routing your wires like the stock ones were! I’m thinking of using Kingsborne wires, I’ve used them before on my import and they seem real nice. I called and they have a set for $40. They will put any end you want on them and that’s why I’m asking for pictures- so I can see what I need.
Thanks
s/t

*screamin_eagle* · 02-08-2007, 09:48 PM

no picture but i'm running taylor full metal jackets paid somewere around a hundred for them at the end of those wires are some ac delco rapid fires.

FarmTruk · 02-08-2007, 11:29 PM

fwiw...here's a diagram baselining the stock SBC routing...

**special-K** · 02-09-2007, 07:19 AM

I route them out and over w/90s at each end.I use looms off the v/c bolts or just floating,if the lengths are just right.

GMCBubba · 02-09-2007, 08:49 AM

has anyone seen people use the clear HEI caps? do those look cool or do they look a little ricey? white performance sells them for the same price as the normal red caps

FarmTruk · 02-09-2007, 09:22 AM

Quote:

Originally Posted by GMCBubba

has anyone seen people use the clear HEI caps? do those look cool or do they look a little ricey? white performance sells them for the same price as the normal red caps

I've not seen them, but I don't think I'd care for them.

67ChevyRedneck · 02-09-2007, 09:44 AM

That would be weird, yet cool. You could see the ign. sparks...

panhandler62 · 02-09-2007, 09:54 AM

Not to hijack but .....

All of the cool loom brackets I've seen are designed to bolt down with the valve covers but I have later model center bolted valve covers...

Any suggestions?

(Well.. ok, besides buying new heads! lol)

Bishops Trucks · 02-09-2007, 10:19 AM

The ones on the smallblock are centerbolt valve covers and the looms come from Summit Racing and there are no looms on the big block. I think they look just fine the way they are.
Name: JB's Trucks (33).JPG
Views: 722
Size: 31.8 KB

Name: JB's Trucks (33).JPG
Views: 722
Size: 31.8 KB

Name: Project SS 396 (21).jpg
Views: 724
Size: 70.6 KB

Sport/Truck · 02-09-2007, 11:56 AM

Quote:

Originally Posted by FarmTruk

fwiw...here's a diagram baselining the stock SBC routing...

I don’t think that’s stock, mine had clips (using an oil pan bolt) holding two wires on each side. It also was fed between the engine block and motor mount not sure if this part was stock though.
s/t

Edit: I didnt get the diagram on my work computer when I posted that.
That is how mine was ran.
thanks,
s/t

71chevylowrider · 02-09-2007, 12:04 PM

Here's mine,

**SactoJim** · 02-09-2007, 04:12 PM

I like em run under the headers....just gives a clean look.

fastwillie 696969 · 02-09-2007, 07:08 PM

heres my taylor wires

GREASEMONKEY72 · 02-09-2007, 07:21 PM

nothin special but its a thought of how to run them, and ive seen the clear dizzy caps and it looks awesome to watch it arc

GREASEMONKEY72 · 02-09-2007, 07:24 PM

i just relized how bad my engine looks compared to all your engines..haha...ohwell

st1x10 · 02-09-2007, 07:48 PM

Quote:

Originally Posted by 70blowngmc

heres my taylor wires

What kinda wire holder is that?

Sport/Truck · 02-11-2007, 11:07 PM

Quote:

Originally Posted by SactoJim

I like em run under the headers....just gives a clean look.

What are those gauges for?

68w/sbc406 · 02-11-2007, 11:31 PM

i am guessing air bags due to the tubular control arm

ETsC10 · 02-11-2007, 11:44 PM

...guess what was going on (in) New Years weekend...
Can't even see the wires after the install.

ET

67cst · 02-11-2007, 11:48 PM

here are mine...(taylors) cut to length

piecesparts · 02-12-2007, 12:10 AM

MSD 8 MM wires run from the Dizzy around the end of the heads and down to the plugs. This is using the factory wire looms.

I don't have pics of the other truck but it is Taylor wiring run along the back of the heads using billet aluminum wire looms and then dropping off at each plug.

fastwillie 696969 · 02-12-2007, 02:00 AM

Quote:

Originally Posted by st1x10

What kinda wire holder is that?

sprecta wire loom i got them from pep boys in a 50% off discount box
they might still have them in stock

piecesparts · 02-12-2007, 09:53 AM

I used the spectre loom once and found it to be efficient, but it was too light weight and kept cutting my hands when I worked around it, so I went with the GM performance aluminum loom.

Sammy · 02-12-2007, 10:50 AM

On this subject line. Before some one posted that a vette 350 with HEI was pre-made & long enough.. Everytime I buy a set they seem short & don't have the 90 ends. Anyone have a pic of the vette year & style for a 350 along with the #?

underdog8704 · 02-12-2007, 11:39 AM

Quote:

Originally Posted by SactoJim

I like em run under the headers....just gives a clean look.

How did you run them under the headers? I am looking into doing this and was wondering the best way to get it done.

02-08-2007, 09:39 PM	#1
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Post up a picture of your plug wires! I just ordered my Whites Performance dizzy today. I’m assuming you guys aren’t routing your wires like the stock ones were! I’m thinking of using Kingsborne wires, I’ve used them before on my import and they seem real nice. I called and they have a set for $40. They will put any end you want on them and that’s why I’m asking for pictures- so I can see what I need. Thanks s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

02-08-2007, 09:48 PM	#2
screamin_eagle Account Suspended Join Date: Dec 2005 Posts: 114	Re: Post up a picture of your plug wires! no picture but i'm running taylor full metal jackets paid somewere around a hundred for them at the end of those wires are some ac delco rapid fires.

02-08-2007, 11:29 PM	#3
FarmTruk In Memoriam... Join Date: Nov 2006 Location: Wallburg, NC Posts: 1,216	Re: Post up a picture of your plug wires! fwiw...here's a diagram baselining the stock SBC routing... __________________ '68 C10 SWB 307ci 2BBL *FarmTruk Pics Here* *"You know, doing what is right is easy. The problem is knowing what is right."*

02-09-2007, 07:19 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Post up a picture of your plug wires! I route them out and over w/90s at each end.I use looms off the v/c bolts or just floating,if the lengths are just right. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-09-2007, 08:49 AM	#5
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: Post up a picture of your plug wires! has anyone seen people use the clear HEI caps? do those look cool or do they look a little ricey? white performance sells them for the same price as the normal red caps __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.

02-09-2007, 09:44 AM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Post up a picture of your plug wires! That would be weird, yet cool. You could see the ign. sparks... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-09-2007, 09:54 AM	#8
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,763	Re: Post up a picture of your plug wires! Not to hijack but ..... All of the cool loom brackets I've seen are designed to bolt down with the valve covers but I have later model center bolted valve covers... Any suggestions? (Well.. ok, besides buying new heads! lol) __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

02-09-2007, 10:19 AM	#9
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Post up a picture of your plug wires! The ones on the smallblock are centerbolt valve covers and the looms come from Summit Racing and there are no looms on the big block. I think they look just fine the way they are. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-09-2007, 12:04 PM	#11
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Post up a picture of your plug wires! Here's mine, Attached Images

02-09-2007, 04:12 PM	#12
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Post up a picture of your plug wires! I like em run under the headers....just gives a clean look. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:20 PM.

02-09-2007, 07:08 PM	#13
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: Post up a picture of your plug wires! heres my taylor wires __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex Last edited by fastwillie 696969; 02-23-2008 at 08:33 AM.

02-09-2007, 07:21 PM	#14
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Post up a picture of your plug wires! nothin special but its a thought of how to run them, and ive seen the clear dizzy caps and it looks awesome to watch it arc Attached Images __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

02-09-2007, 07:24 PM	#15
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Post up a picture of your plug wires! i just relized how bad my engine looks compared to all your engines..haha...ohwell __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

02-11-2007, 11:31 PM	#18
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	Re: Post up a picture of your plug wires! i am guessing air bags due to the tubular control arm __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

02-11-2007, 11:44 PM	#19
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Post up a picture of your plug wires! ...guess what was going on (in) New Years weekend... Can't even see the wires after the install. ET Attached Images __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...



Register or Log In To remove these advertisements.

02-11-2007, 11:48 PM	#20
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	Re: Post up a picture of your plug wires! here are mine...(taylors) cut to length Attached Images __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

02-12-2007, 12:10 AM	#21
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Post up a picture of your plug wires! MSD 8 MM wires run from the Dizzy around the end of the heads and down to the plugs. This is using the factory wire looms. I don't have pics of the other truck but it is Taylor wiring run along the back of the heads using billet aluminum wire looms and then dropping off at each plug. Attached Images

02-12-2007, 09:53 AM	#23
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Post up a picture of your plug wires! I used the spectre loom once and found it to be efficient, but it was too light weight and kept cutting my hands when I worked around it, so I went with the GM performance aluminum loom.

02-12-2007, 10:50 AM	#24
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Post up a picture of your plug wires! On this subject line. Before some one posted that a vette 350 with HEI was pre-made & long enough.. Everytime I buy a set they seem short & don't have the 90 ends. Anyone have a pic of the vette year & style for a 350 along with the #? __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.