1982, need help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVY_FOREVER · 11-21-2002, 11:47 PM

I bought a 1982 GMC 1/2 4X4 recently.

I have a few problems with the guages. The temp guage does not work (need to replace) any suggestions? The battery needle is broken (what should I do)?

Also any one know where to get replacement lenses for turn signals and brake lights?

Thanks,
BRIAN

75stepside · 11-21-2002, 11:52 PM

go to www.chevyduty.com and www.lmctruck.com and get FREE catalogues from both... they'll give you a lot of ideas and wants and needs.... both companys have a ton of parts; chevyduty has things better priced though.

you may try a salvage yard, of course...

ocbaud · 11-21-2002, 11:53 PM

man, i was just bout to post lmc's site

78SilveradoSWB · 11-21-2002, 11:56 PM

1. Check the green wire that goes to the temperature switch thats bolted the block. Mine wasn't working either due to poor connection.

2. You sometimes can find gauges at Ebay, or just post a want in the 73-87 parts board. LMC or ChevyDuty catalogs list gauges too, and they sell the replacement parking and tail light lenses. Before you do that just post in the parts boards. Lots of guys have spare parts.

CHEVY_FOREVER · 11-22-2002, 09:55 AM

Thanks for the help, I will check the wires again.

Does anyone here know where to pick up a solid front bumper or if the one I have can be painted? The chrome is chipping off or whatever it is, maybe I could sand blast and paint it? Also what about a good place for a grill.

Thanks again,
BRIAN

**old Rusty C10** · 11-22-2002, 10:30 AM

i would post a thing here abotu the guages and all here. There are guys who have this stuff and sell them regularly. Im also a big fan of Ebay, as ive gotten alot of stuff for my truck there.As for a bumper, i gotta see i may have one for you otherwise even catalogues like JC Whitney has Fey Bumpers which are fine replacements. I always use them on my fleet of wrecks when i need a new step bumper. As for LMC and the chevyduty parts make sure you price compare and check shipping costs

CHEVY_FOREVER · 11-22-2002, 10:42 AM

Thanks again for the help. I will check it out.

Another thing, I am not sure what the correct term is for the the section on the floor closest to the door that has rusted pretty bad. Maybe door sill? Any how what should I do to repair the rusted area?

Later,
BRIAN

11-21-2002, 11:47 PM	#1
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	1982, need help. I bought a 1982 GMC 1/2 4X4 recently. I have a few problems with the guages. The temp guage does not work (need to replace) any suggestions? The battery needle is broken (what should I do)? Also any one know where to get replacement lenses for turn signals and brake lights? Thanks, BRIAN

11-22-2002, 10:30 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	parts i would post a thing here abotu the guages and all here. There are guys who have this stuff and sell them regularly. Im also a big fan of Ebay, as ive gotten alot of stuff for my truck there.As for a bumper, i gotta see i may have one for you otherwise even catalogues like JC Whitney has Fey Bumpers which are fine replacements. I always use them on my fleet of wrecks when i need a new step bumper. As for LMC and the chevyduty parts make sure you price compare and check shipping costs __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-21-2002, 11:52 PM	#2
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	go to www.chevyduty.com and www.lmctruck.com and get FREE catalogues from both... they'll give you a lot of ideas and wants and needs.... both companys have a ton of parts; chevyduty has things better priced though. you may try a salvage yard, of course...

11-21-2002, 11:53 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	man, i was just bout to post lmc's site

11-21-2002, 11:56 PM	#4
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	1. Check the green wire that goes to the temperature switch thats bolted the block. Mine wasn't working either due to poor connection. 2. You sometimes can find gauges at Ebay, or just post a want in the 73-87 parts board. LMC or ChevyDuty catalogs list gauges too, and they sell the replacement parking and tail light lenses. Before you do that just post in the parts boards. Lots of guys have spare parts.

11-22-2002, 09:55 AM	#5
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	Thanks for the help, I will check the wires again. Does anyone here know where to pick up a solid front bumper or if the one I have can be painted? The chrome is chipping off or whatever it is, maybe I could sand blast and paint it? Also what about a good place for a grill. Thanks again, BRIAN

11-22-2002, 10:42 AM	#7
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	Thanks again for the help. I will check it out. Another thing, I am not sure what the correct term is for the the section on the floor closest to the door that has rusted pretty bad. Maybe door sill? Any how what should I do to repair the rusted area? Later, BRIAN



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.