could someone post a good clear pic of a 67 spec ID sticker ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19673ontree · 03-13-2007, 03:46 PM

I also need the exact width and length and doe's anyone know the part # or code in 67 for the driver's sunvisor as it was the only option my truck had , I am gonna make me a new spec ID sticker to put on after I get everything painted thank's

1BadSS · 03-13-2007, 07:15 PM

From a 67 3/4 ton.

19673ontree · 03-13-2007, 07:24 PM

thanks , anyone know what the option code would be for a sunvisor ?

1BadSS · 03-13-2007, 07:32 PM

Arent sunvisors factory?

CPNEJR · 03-13-2007, 07:50 PM

i believe that in 67 they were an option or at least the passenger side was

19673ontree · 03-13-2007, 09:28 PM

thank's for the reply's , I went ahead and made me a spid sticker , I just looked my truck over and it look's to have had two option's a heater and a 373 posi (HEATER WAS OPTIONAL)? anyway I just wanted one on the glove box door after I get done painting it ,, ohh yea my truck was the 503 green and I'm painting it black so I put 500 for black ,,,,,, here is a pic may not be perfect but will look cool none the less

19673ontree · 03-13-2007, 09:30 PM

pic came out blurry but in person it is clear ? my camera must be going south ?

19673ontree · 03-13-2007, 09:33 PM

as already said the driver sunvisor must have been std pass was optional , my truck did not have a pass one ? mine is PLAIN JANE !!

DAJ 67 · 03-13-2007, 09:40 PM

19673ontree,
If your truck is a Short wheel base truck, the overall length (front to rear) is 188 1/2 inches in length. If long wheel base, then overall length is 207 3/4 inches (front to rear). 70 inches tall ( 2 wheel drive ) and 79 inches wide outer fender to outer fender. As far as sunvisors, I am not finding any information stating that those were an option, and after 21 years of gathering information on the 1967-1972 Chevrolets, I personally have never seen or heard of a truck that did not come from the factory with driver and passenger sunvisors. Hope this helps.

19673ontree · 03-13-2007, 09:48 PM

I got the wheelbase from pic's of original sticker's on this site , my truck did not have a pass sunvisor unless it was glued on because the cab isn't even drilled for it LOL

DAJ 67 · 03-13-2007, 09:53 PM

I don't have any idea, never have seen before.

Longhorn Man · 03-13-2007, 10:07 PM

I've seen 4 or 5 67's without the passenger visor.
The heater was standard stareting in 67, but it was still treated like an option. The buyer had to specify no heater, it was then built without, but it was not optioned like a heater delete, it was kinda like a standard option.

03-13-2007, 03:46 PM	#1
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	could someone post a good clear pic of a 67 spec ID sticker ? I also need the exact width and length and doe's anyone know the part # or code in 67 for the driver's sunvisor as it was the only option my truck had , I am gonna make me a new spec ID sticker to put on after I get everything painted thank's __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

03-13-2007, 07:15 PM	#2
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: could someone post a good clear pic of a 67 spec ID sticker ? From a 67 3/4 ton. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

03-13-2007, 07:24 PM	#3
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: could someone post a good clear pic of a 67 spec ID sticker ? thanks , anyone know what the option code would be for a sunvisor ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

03-13-2007, 07:32 PM	#4
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: could someone post a good clear pic of a 67 spec ID sticker ? Arent sunvisors factory? __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

03-13-2007, 07:50 PM	#5
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: could someone post a good clear pic of a 67 spec ID sticker ? i believe that in 67 they were an option or at least the passenger side was __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

03-13-2007, 09:28 PM	#6
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: could someone post a good clear pic of a 67 spec ID sticker ? thank's for the reply's , I went ahead and made me a spid sticker , I just looked my truck over and it look's to have had two option's a heater and a 373 posi (HEATER WAS OPTIONAL)? anyway I just wanted one on the glove box door after I get done painting it ,, ohh yea my truck was the 503 green and I'm painting it black so I put 500 for black ,,,,,, here is a pic may not be perfect but will look cool none the less Attached Images __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC Last edited by 19673ontree; 03-13-2007 at 09:31 PM.

03-13-2007, 09:30 PM	#7
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: could someone post a good clear pic of a 67 spec ID sticker ? pic came out blurry but in person it is clear ? my camera must be going south ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

03-13-2007, 09:33 PM	#8
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: could someone post a good clear pic of a 67 spec ID sticker ? as already said the driver sunvisor must have been std pass was optional , my truck did not have a pass one ? mine is PLAIN JANE !! __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

03-13-2007, 09:40 PM	#9
DAJ 67 Registered User Join Date: Dec 2006 Location: Mount Vernon, MO Posts: 96	Re: could someone post a good clear pic of a 67 spec ID sticker ? 19673ontree, If your truck is a Short wheel base truck, the overall length (front to rear) is 188 1/2 inches in length. If long wheel base, then overall length is 207 3/4 inches (front to rear). 70 inches tall ( 2 wheel drive ) and 79 inches wide outer fender to outer fender. As far as sunvisors, I am not finding any information stating that those were an option, and after 21 years of gathering information on the 1967-1972 Chevrolets, I personally have never seen or heard of a truck that did not come from the factory with driver and passenger sunvisors. Hope this helps.

03-13-2007, 09:48 PM	#10
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: could someone post a good clear pic of a 67 spec ID sticker ? I got the wheelbase from pic's of original sticker's on this site , my truck did not have a pass sunvisor unless it was glued on because the cab isn't even drilled for it LOL Attached Images __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

03-13-2007, 09:53 PM	#11
DAJ 67 Registered User Join Date: Dec 2006 Location: Mount Vernon, MO Posts: 96	Re: could someone post a good clear pic of a 67 spec ID sticker ? I don't have any idea, never have seen before.

03-13-2007, 10:07 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: could someone post a good clear pic of a 67 spec ID sticker ? I've seen 4 or 5 67's without the passenger visor. The heater was standard stareting in 67, but it was still treated like an option. The buyer had to specify no heater, it was then built without, but it was not optioned like a heater delete, it was kinda like a standard option.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.