1967 die cast model F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 03-15-2007, 11:08 PM

ACE HARDWARE 1967 CHEVY LONG/FLEET PICKUP TRUCK / BANK (DIECAST)
opening doors to show a black int, with buddy buckets, body is white and silver with black and red stripes, a hard tannou cover with waves so it apears to be a soft cover slides back to reveal a coin slot. I installed a set of corvette rally wheels on it... way better than the cheesey hub caps with tall by skinny tires it came with.
Damage is next to nill with one small chip on dvr 1/4 panel.
i was going to repaint this one as a 68 50th annv truck.
This one is a hair smaller than the 1/24 scale trucks.
Please respond in thread, PMs will be ignored
Shipped to lower 48, elsewhere add 2 bucks, overseas add 3 bucks.
First come first served
all prices are shipped... OBO... and cash/money order/postal money order or personal check if need be... no pay pal.
25 bucks shipped

Longhorn Man · 03-15-2007, 11:09 PM

BarryB has dibs on this, he mentioned interest in another thread.

**BIG ORANGE** · 03-16-2007, 12:06 AM

I've got that very same truck!!! From ebay.........yr's ago!

BarryB · 03-16-2007, 10:14 AM

Hey Andy, send me your mailing address because I'll take it. I'll try and get a money order or if you'll take a check from me?? You send me a PM with your address

Longhorn Man · 03-16-2007, 02:23 PM

PM on the way chief!

BarryB · 03-16-2007, 04:10 PM

payment will be sent directlly. Thanks

03-15-2007, 11:08 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	1967 die cast model F/S ACE HARDWARE 1967 CHEVY LONG/FLEET PICKUP TRUCK / BANK (DIECAST) opening doors to show a black int, with buddy buckets, body is white and silver with black and red stripes, a hard tannou cover with waves so it apears to be a soft cover slides back to reveal a coin slot. I installed a set of corvette rally wheels on it... way better than the cheesey hub caps with tall by skinny tires it came with. Damage is next to nill with one small chip on dvr 1/4 panel. i was going to repaint this one as a 68 50th annv truck. This one is a hair smaller than the 1/24 scale trucks. Please respond in thread, PMs will be ignored Shipped to lower 48, elsewhere add 2 bucks, overseas add 3 bucks. First come first served all prices are shipped... OBO... and cash/money order/postal money order or personal check if need be... no pay pal. 25 bucks shipped Attached Images

03-15-2007, 11:09 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 1967 die cast model F/S BarryB has dibs on this, he mentioned interest in another thread.

03-16-2007, 12:06 AM	#3
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: 1967 die cast model F/S I've got that very same truck!!! From ebay.........yr's ago! __________________ Things happen for a reason!

03-16-2007, 10:14 AM	#4
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 1967 die cast model F/S Hey Andy, send me your mailing address because I'll take it. I'll try and get a money order or if you'll take a check from me?? You send me a PM with your address

03-16-2007, 02:23 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 1967 die cast model F/S PM on the way chief!

03-16-2007, 04:10 PM	#6
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 1967 die cast model F/S payment will be sent directlly. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.