fs/ hipo bbc parts

[Robznob11]

I have a set of manley severe duty valves new in box 2.19 1.88 11/32 stems stock length bbc, these are the best of the best and are great for nitrous turbo and blowers 250.00
set of bbc large oval port heads cast# 049 again the best oval port castings gm ever made will support 650 hp when set up right and bowl blended, magnifluxed and checked good 175.00
set of isky tool room springs pt # 9965 these are used and are for a solid roller cam good to .650 lift they have super seven titanium retainers, they have been checked and are still good theses springs are 450.00 new and retainers are about 200.00 new ill take the first 100.00
trades are welcome

I need rear bed patch panels where the body line is, 3 seires posi carrer, nice steering wheel, shock relocator and drop shock kit, set of 2" drop shocks to replace the 3" ones i have, also need some 11x2 drums off a late 60's chevy car with 5 on 4 3/4 bolt pattern, good manual steering box, etc let me know about custom stuff like led lights, auto trans support, oh i am also looking for a good rebuildable th400 or 350 tranny, just to mention a few...

[sakohntr]

Are those heads closed chamber???

[Robznob11]

no they are considered simi open, most just say open, they are 119 cc chambers, and they have 253 cc intake runners, the int chamber design is where the exceed the others they will produce very good velocity and make a thumping street motor or mild bracket racer becuas they make gobbs of tq. they will out flow those cheap 790.00 aluminum heads on ebay with ease.. there are flow numbers avalable on the net ported and un ported. i would run these over the 990 recs on a street motor any day, but however they won't mach the dart pro1 aluminums i bought....but now your talking buckaroos....

[sakohntr]

Interested, what is the date code on the heads? thanks

[Robznob11]

ill get them in the morning , i don't wan't my wife nagging tonight. and ill post them,

[Robznob11]

c 15 73 gm 9t pass 358049
c 9 73 gm 9t pass 358049