WTB Nice Carb and Intake

[rsorrowjr]

Im looking for a nice 4bbl carb and intake for a 350. It has heads that are from an 88 model. I need a carb that is at least 600cfm either edlebrock or holley. Let me know what you have. Also looking for a set of long tube headers. Thanks

[BarryB]

I have a weiand stealth intake idle to 7000 rpm's. I'll take 100 + shipping . The only carbs I have are Holley double pumpers 650 cfm. I'll have to have 250 for one of those. If any interests let me know.

[rsorrowjr]

Thanks BarryB but thats a little more than my budget will allow. I appreciate your time though

[rsorrowjr]

ttt

[rsorrowjr]

ttt

[DennyB]

I have a Weiand single plane aluminum manifold, and a Carter AFB Competition series carb. part #9636 SA.
I think it came off a mopar. it dosent have the auto trans kickdown cable provision but the throttle will hookup.
I will take $150 plus shipping for the set.
I dont have a pic of the manifold on this pc but will post the carb.

[rsorrowjr]

Is the carb in good shape? Do you know the part number for the intake so I can make sure it would fit my motor?

[DennyB]

I just realized you have 88 heads. I don't know is this manifold will fit.
Its an old manifold. probably similar vintage as your truck. It needs a good cleaning and was painted black. The front freeze plug was replaced with a rubber one. The number on the manifold is WEIAND 7508.
If you just want the carb I'll take $100 for it.
I have not run the carb on the road. Just to test fire and tune my engine.
Seemed to run fine. I did not hook up the electric choke.
I'll see if I can load manifold pics from this pc.

[DennyB]

rsorrowjr

Did you want any of this?
Otherwise I will put them away.

Thanks

[EyeH8the24]

barry b you still have the intake ? any pics ?

[rsorrowjr]

I dont think those are going to work for me. Sorry for the delayed response. Thanks

[DennyB]

No problem.