![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jul 2000
Location: NC
Posts: 987
|
drop spindles or springs
I am going to install a 2/4 drop in my 72 half ton with a 400sbc. I have been researching the options and have found that ECE sells a 2.5 inch drop spindle that eliminate the "harsh ride and alignment problems common with other forms of lowering". Is the added expense of the drop spindles worth it compared to the 2 drop springs? Thanks.
|
![]() |
![]() |
![]() |
#2 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: drop spindles or springs
Not for 2 inches, you'll never notice the change in ride with a set of 2 inch springs.
Save your money. I'd buy the Summit brand drop springs. They are cheapest and actually "Ground Force" brand. I've run them many times over the years.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2005
Location: Bendigo, Victoria, Australia
Posts: 35
|
Re: drop spindles or springs
As someone with 30 years experience in alignment, I'm really big into maintaining suspension geometry. For that reason I went with the 2.5" spindles from ECE. They're excellent pieces. I originally bought a set from Classic Parts of America, who in-turn bought them from Classic Performance Products. Stay away from them. The parts have a design flaw that prevented me from being able to set the alignment. I tried to work with them to get it corrected. Besides loosing a bunch of time and hair, I was never able to work out any kind of return adjustment. I degrees, sorry.
I used the drop spindles on the front with new springs and 4 inch springs on the rear. I also added front and rear stabilizers and KYB shocks. My truck handles like a go-cart, which is what I wanted. I can hang a corner at 30 mph like it's on rails. I also wielded all the cross-members when I had the frame off, because handling was always my intent.
__________________
Darrell 67 short stepside Complete frame-up |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2000
Location: NC
Posts: 987
|
Re: drop spindles or springs
Thanks for the replies! Does the geometry get out of line enough that it is difficult to get adjusted with just 2" drop springs?
|
![]() |
![]() |
![]() |
#5 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: drop spindles or springs
Not unless you have something significantly worn.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#6 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: drop spindles or springs
Springs and spindles both...once you start lowering...2" is never enough...LOL! I'm looking at mine now realizing that I am going to have to section the front cross member before I am happy.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|