Need ECE shock relocation Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AKChevyman · 04-06-2007, 09:37 PM

I need to knowwhere the big spacer goes. On the out side of the bracket near the shock or on the inside thanks have a great day.

**Steven B** · 04-06-2007, 11:02 PM

I don't remember any spacers when I installed mine. Did yours come with installation instructions? ECE is very good with there instructions.

68 P.O.S. · 04-06-2007, 11:37 PM

I don't remember any spacer on my ECE kit either.

Tx Firefighter · 04-07-2007, 11:34 AM

Here is what they should look like installed: No spacers anywhere.

jmking9 · 04-07-2007, 02:20 PM

My kit had the spacer too. I just put it on my truck yesterday. I put the spacer toward the outside of the truck, against the new lower brace, not touching the shock. I was kinda puzzled myself. I tried it a couple of ways and that seemed to make the most sense. Hope this helps. -JK

AKChevyman · 04-07-2007, 04:45 PM

I will get some pics I put them on with the spacers toward the shock I noticed that the shock hit the bracket if I tried to put the spacer on toward the outside of the truck.

04-06-2007, 09:37 PM	#1
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Need ECE shock relocation Help I need to knowwhere the big spacer goes. On the out side of the bracket near the shock or on the inside thanks have a great day. __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

04-06-2007, 11:02 PM	#2
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	Re: Need ECE shock relocation Help I don't remember any spacers when I installed mine. Did yours come with installation instructions? ECE is very good with there instructions. __________________ 70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful

04-06-2007, 11:37 PM	#3
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,662	Re: Need ECE shock relocation Help I don't remember any spacer on my ECE kit either. __________________ 72 C10 lwb fleetside -stock 350/350 combo

04-07-2007, 11:34 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Need ECE shock relocation Help Here is what they should look like installed: No spacers anywhere. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 04-07-2007 at 11:34 AM.

04-07-2007, 02:20 PM	#5
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: Need ECE shock relocation Help My kit had the spacer too. I just put it on my truck yesterday. I put the spacer toward the outside of the truck, against the new lower brace, not touching the shock. I was kinda puzzled myself. I tried it a couple of ways and that seemed to make the most sense. Hope this helps. -JK

04-07-2007, 04:45 PM	#6
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: Need ECE shock relocation Help I will get some pics I put them on with the spacers toward the shock I noticed that the shock hit the bracket if I tried to put the spacer on toward the outside of the truck. __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.