1969 SuperBurb build-up (Bagged and Blown!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shifty · 04-09-2007, 12:08 PM

Good work, Rob. I also got to spend time w/my truck over the weekend all I have left to fire up now is like ... 6 wires, positive battery cable fab and install, setup my oil pressure gauge, and ... tighten the fuel lines I made this weekend

.

I have a question for you though: What do people do about the weld beads on the inside of the body panel? Obviously, you can't really grind them, or coat them - aren't they more prone to rust after welding them?

This is one of those things I've always wondered, but never asked anyone about.

04-09-2007, 12:08 PM	#11
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Good work, Rob. I also got to spend time w/my truck over the weekend all I have left to fire up now is like ... 6 wires, positive battery cable fab and install, setup my oil pressure gauge, and ... tighten the fuel lines I made this weekend . I have a question for you though: What do people do about the weld beads on the inside of the body panel? Obviously, you can't really grind them, or coat them - aren't they more prone to rust after welding them? This is one of those things I've always wondered, but never asked anyone about. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.