Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-15-2007, 07:59 PM | #1 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
What did you get done? 4/15/07
I finally removed the other wheel tub and bedside from the shortbed,relocated the truck bed to the garage,from the shop.I also got the bottom end done on the 360 (bored out 350) for the 71.Mowed the yard......
Last edited by 1969k10stepside; 04-15-2007 at 08:00 PM. |
04-15-2007, 08:17 PM | #2 |
Zappaphile!
Join Date: Apr 2007
Location: Los Banos, California
Posts: 228
|
Re: What did you get done? 4/15/07
bitter wind out here today, got plugs/wires done, also took out junk newer style GM Radio, and reinstalled factory ashtray. Fixed a good sized vac leak at the carb..
posted pic's of the truck finally, and updated my signature line on the board
__________________
1969 C20 LWB Camper Special - The Beater.. 1998 Cheyenne V6 - 4/6 Drop - For The Son |
04-15-2007, 08:17 PM | #3 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,218
|
Re: What did you get done? 4/15/07
Finally did some stuff on the truck. Did some patching/welding on the bed where I added my fuel filler.
http://67-72chevytrucks.com/vboard/s...=221437&page=2 Ran out of welding gas, so I worked on the template to cover the filler neck in the bed. Helped a friend work on the GPS in his Caddy. Worked on my compressor and fixed a pulley problem on the motor (I hope). Hung out with a board member EdB this afternoon. Oh yeah, watched it rain and blow alot both days.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 04-15-2007 at 08:18 PM. |
04-15-2007, 08:18 PM | #4 |
CAN'T FIX NOTHIN
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
|
Re: What did you get done? 4/15/07
NOTHING !
here in southrust virginia it's 37 degree's it has almost flooded it rained all night last night then today it snowed !! my garage has four season climate control in spring it cold in summer its hot in fall it's wet and cold and in winter it's froze !!
__________________
1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC |
04-15-2007, 08:28 PM | #5 |
Registered User
Join Date: Mar 2007
Location: Rohnert park, CA
Posts: 139
|
Re: What did you get done? 4/15/07
Rebuilt my bed dolly, installed rear lowering springs, finished sanding rear frame and shot some silver paint on it oh and I got the garage cleaned up
|
04-15-2007, 08:32 PM | #6 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: What did you get done? 4/15/07
Cut down a tree, installed new swings for the kids, took the family out to eat and never made it to the junkyard due to weather.... I'm taking leave all next week so ask me again next sunday!
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
04-15-2007, 08:36 PM | #7 |
Cultural Infidel
Join Date: Jan 2007
Location: Clearwater, FL
Posts: 668
|
Re: What did you get done? 4/15/07
I dug 33 post holes and installed 240' of vinyl fence. My shoulders are killing me!
__________________
posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished. |
04-15-2007, 08:42 PM | #8 |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: What did you get done? 4/15/07
Took out the old dash. (First one)Swapped some of the pieces around................Got the second one ready.
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ) Last edited by 71MUTT; 04-15-2007 at 08:43 PM. Reason: I'll never finish |
04-15-2007, 08:47 PM | #9 |
Registered User
Join Date: Sep 2006
Location: Amarillo, TX
Posts: 178
|
Re: What did you get done? 4/15/07
pulled the rubber mat, insulation, and seat belts out of the 71's floor to see just how bad the rust is that i hope i will be getting some work done on this week. cab corners rockers and floor patches looks like. also topped of the brake fluid that was almost dry.
oh and does anyone know what the bracket on the passenger side in the corner of the cab is for? it is on the back side of the door jamb about as high up as the seat back. is it for a jack or what |
04-15-2007, 08:49 PM | #10 |
Registered User
Join Date: Sep 2006
Location: colorado springs colorado
Posts: 737
|
Re: What did you get done? 4/15/07
I got the passenger cab corner on,inner and outter rockers. I did the driverside last week end. I'll get a skim coat of filler on them this week and sanded down. Chassis comes home next saturday.
Then the real fun starts!!! Start cleaning it and preping for paint. That's it for this week end. Oh yeah almost forgot,,,, cleaned up the mess from the cab corners/rockers project in the garage. Swear there had to have been 50 pounds of dirt in there. I did find a huge wasps nest in the passenger side rocker. Frank
__________________
70 chevy lwb c10 454/th400 and a 9" rearend suicide doors, marker light fuel fill, 4" cowl , mini tub Last edited by sick69; 04-15-2007 at 08:50 PM. |
04-15-2007, 08:55 PM | #11 |
Registered User
Join Date: Feb 2007
Location: Winston Salem, NC
Posts: 310
|
Re: What did you get done? 4/15/07
New exhaust on the DD plus fixed the header leak with aluminum header gaskets up top and used an extra set of flanges of the lower part of the header to use as a gasket between header and exhaust.
For your info it works great
__________________
72 LWB |
04-15-2007, 08:59 PM | #12 | |
Cultural Infidel
Join Date: Jan 2007
Location: Clearwater, FL
Posts: 668
|
Re: What did you get done? 4/15/07
Quote:
Yes, it is for the jack.
__________________
posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished. |
|
04-15-2007, 09:14 PM | #13 |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: What did you get done? 4/15/07
It was probably holding it together.
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ) |
04-15-2007, 09:19 PM | #14 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: What did you get done? 4/15/07
I got the windows tinted in the truck last week, and Saturday I put the ECE sway bar lowering brackets on. I then installed the sway bar with new Energy suspension bushings and brackets. I also put some drywall up in my kitchen, still have to spackle it. Sunday I didn't do anything but cruise around here on the computer....
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
04-15-2007, 09:22 PM | #15 |
Registered User
Join Date: Mar 2007
Location: Marbury, Alabama
Posts: 195
|
Re: What did you get done? 4/15/07
Pressure washed my engine bay because my engine will be going back in next weekend. Oh yeah and I cut grass.
|
04-15-2007, 09:30 PM | #16 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Re: What did you get done? 4/15/07
Spent almost all weekend getting some work done to the garage. At least I got to be IN the garage. The truck sat outside & pouted the whole time too...
|
04-15-2007, 09:53 PM | #17 |
NOT REALLY BANNED!
Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Re: What did you get done? 4/15/07
Took the 69 out for its first drive today.
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. |
04-15-2007, 09:58 PM | #18 |
I survived Dead Man's Curve.
Join Date: Apr 2006
Location: The Nine-Five-687
Posts: 389
|
Re: What did you get done? 4/15/07
Well, nothing today. But YESTERDAY...
I'm driving through town and my starter begins to run by itself! And a starter going 40 MPH doesn't last long, and the whole motor died. So I had to push the truck into a sporting goods parking lot. Then it started to rain. I found out later that wires coming from my ignition lock cylinder were bare and they decided to touch each other. Changing a starter... in a crowded parking lot... during a full out rain storm... priceless.
__________________
"The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive Cherry Bomb... Disturbing the Peace Since 1968. Last edited by ThatOneBlue67; 04-15-2007 at 09:59 PM. Reason: Addition |
04-15-2007, 10:13 PM | #19 |
Self-proclaimed LED man
Join Date: Nov 2003
Location: Harrisburg, Missouri
Posts: 1,021
|
Re: What did you get done? 4/15/07
Bled the rear brakes i just rebuilt on friday night. Also installed my green led's i bought from 70c10. Hey 1BadSS did you go to that swap meet in woodlandville, KS this weekend? Weather was crappy till 9:00 but after that there were a lot of good deals. Got a set of good used tires for my blue 72, a battery box, some of those inner fender clips, a glass pack, and a mallory tach and some other misc exhaust stuff to replace whats left of the one on the truck now. Sunday i figured out my ignition problem. After i converted the truck to HEI, it never has reved up properly. Turns out the spring loaded weights on the advance were frozen stiff and stuff was all out of wack. Oiled the advance setup, and replaced the springs/weights. After i reset the timing, she rev's with the best of them and purrs like a kitten.
__________________
My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor |
04-15-2007, 10:15 PM | #20 |
Registered User
Join Date: Sep 2006
Location: colorado springs colorado
Posts: 737
|
Re: What did you get done? 4/15/07
very well could have been!!! it filled the whole rocker panel.
__________________
70 chevy lwb c10 454/th400 and a 9" rearend suicide doors, marker light fuel fill, 4" cowl , mini tub |
04-15-2007, 10:41 PM | #21 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: What did you get done? 4/15/07
installed the lifters, intake, set all the valves on my son's 400 i am giving him..
next prime., install the dizzy, carb, brackets and pulleys. were going to start this one and make a video installed a water neck and a intake few plugs on the vortec 355 waiting for some mounting brackets for the wire looms. then i can go to town on this baby Last edited by rage'nrat638; 07-12-2007 at 06:54 AM. |
04-15-2007, 10:45 PM | #22 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: What did you get done? 4/15/07
O YEA NICE WORK GUY'S
|
04-15-2007, 10:51 PM | #23 | |
NOT REALLY BANNED!
Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Re: What did you get done? 4/15/07
Quote:
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. |
|
04-15-2007, 11:02 PM | #24 |
Tool Addiction=Money Shortage
Join Date: Mar 2006
Location: Grand Forks, ND
Posts: 233
|
Re: What did you get done? 4/15/07
724x4 I had to do the exact same thing to my HEI this weekend. The pins for the weights were rusted and the weights were stuck. I bought the MR Gasket weight and spring kit. Then I did a beautiful power slide with my new found power.
9.00 spring and weight kit = Double the horse power!
__________________
1967 K20 400TBI SM465/NP205 posi front, Detroit locker 4.56 rear |
04-15-2007, 11:04 PM | #25 |
Ever heard of Beech Island??
Join Date: Apr 2007
Location: Clemson, SC
Posts: 327
|
Re: What did you get done? 4/15/07
cool
Put in new distributor, plugs, wires, better timing made a new tool. deep fried a turkey |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|