Hand throttle hook up? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Americanrider · 12-05-2005, 04:56 AM

I just got a 67/68 OE dash hand throttle cable and would like to see pics of a stock setup where it hooks into the carb linkage and where it passes through the firewall. Also like to know which knob is on top of the right side when you have both? The choke or the throttle.
If anyone has pics of this hooked into a 67 w/2brl solid linkage that would be even better.
Thanks,

boundstaffpress · 12-05-2005, 10:48 AM

Choke cable is on top, Throttle is on bottom. The 1967 pickup I'm buying has this option, but I don't have pictures of the engine. Probably won't venture out to see it again for a couple of weeks.

more later
Justin

Coleman · 12-05-2005, 01:59 PM

Not sure if this helps but my 68 K20 has this option.

Bob Moore · 12-05-2005, 02:25 PM

Coleman shows a very correct early hand throttle set-up. A bracket bolts onto the "normal" arm and the moveable portion of the cable extends through the bracket hole and is secured with a brass stop that has a set screw. The bracket allows the cable to float freely as you step on the gas pedal. Only when you use the hand cable does the cable retract and pull on the linkage rod to the carb.

When using a hand throttle on 71/72(cable style) the hand throttle cable mounts to holes on the inside bracketry down by your feet.

There is a dimple on the firewall that indicates where the cable comes through on the 67-70 models. The cable sheath must be secured at the firewall to work properly.

Americanrider · 12-07-2005, 04:06 AM

Thanks to everyone who replied here.... looks like I have to go out and hunt up this bracket part now before I can make it work.

boundstaffpress · 01-13-2006, 02:16 PM

American rider Have you had any luck assymbling your hand throttle? I went to pull mine out last nite, and the handle and shaft pulled clear out not attached to any cable.

Does anyone have pics of what the underdash setup looks like?

**breeh** · 01-23-2007, 09:05 PM

Here are some more pics. Coleman, I can't quite see how the bracket attaches to the throttle rod. Does the little bolt and nut go through a hole in the throttle arm somewhere?

Coleman · 04-16-2007, 11:45 PM

Sorry, haven't been around for a while, I'll take more pics to try and help out. My 68 k20 is pretty much stock, pulled this truck out of the weeds a few years ago, everything seems to be the original setup.

Bob Moore · 04-17-2007, 01:21 AM

breeh - yes - you are correct. The small nut and bolt hold the bracket to the arm.

12-05-2005, 04:56 AM	#1
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Hand throttle hook up? I just got a 67/68 OE dash hand throttle cable and would like to see pics of a stock setup where it hooks into the carb linkage and where it passes through the firewall. Also like to know which knob is on top of the right side when you have both? The choke or the throttle. If anyone has pics of this hooked into a 67 w/2brl solid linkage that would be even better. Thanks, Last edited by Americanrider; 12-05-2005 at 12:43 PM.

12-05-2005, 10:48 AM	#2
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: Hand throttle hook up? Choke cable is on top, Throttle is on bottom. The 1967 pickup I'm buying has this option, but I don't have pictures of the engine. Probably won't venture out to see it again for a couple of weeks. more later Justin

12-05-2005, 01:59 PM	#3
Coleman Registered User Join Date: Nov 2005 Location: Tucson, AZ Posts: 50	Re: Hand throttle hook up? Not sure if this helps but my 68 K20 has this option. Attached Images

12-05-2005, 02:25 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Hand throttle hook up? Coleman shows a very correct early hand throttle set-up. A bracket bolts onto the "normal" arm and the moveable portion of the cable extends through the bracket hole and is secured with a brass stop that has a set screw. The bracket allows the cable to float freely as you step on the gas pedal. Only when you use the hand cable does the cable retract and pull on the linkage rod to the carb. When using a hand throttle on 71/72(cable style) the hand throttle cable mounts to holes on the inside bracketry down by your feet. There is a dimple on the firewall that indicates where the cable comes through on the 67-70 models. The cable sheath must be secured at the firewall to work properly. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

12-07-2005, 04:06 AM	#5
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Hand throttle hook up? Thanks to everyone who replied here.... looks like I have to go out and hunt up this bracket part now before I can make it work.

01-13-2006, 02:16 PM	#6
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: Hand throttle hook up? American rider Have you had any luck assymbling your hand throttle? I went to pull mine out last nite, and the handle and shaft pulled clear out not attached to any cable. Does anyone have pics of what the underdash setup looks like? __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis

01-23-2007, 09:05 PM	#7
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: Hand throttle hook up? Here are some more pics. Coleman, I can't quite see how the bracket attaches to the throttle rod. Does the little bolt and nut go through a hole in the throttle arm somewhere? Attached Images __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

04-16-2007, 11:45 PM	#8
Coleman Registered User Join Date: Nov 2005 Location: Tucson, AZ Posts: 50	Re: Hand throttle hook up? Sorry, haven't been around for a while, I'll take more pics to try and help out. My 68 k20 is pretty much stock, pulled this truck out of the weeds a few years ago, everything seems to be the original setup. __________________ 68 Chevy K20 72 Chevy K20 (new) 2000 Silverado Z71

04-17-2007, 01:21 AM	#9
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Hand throttle hook up? breeh - yes - you are correct. The small nut and bolt hold the bracket to the arm. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.