![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
LS1 : First startup of GenIII in the truck
Zipped, and in Quicktime format. If you don't want to download and install Quicktime to view it, I highly recommend Quicktime Alternative, which you can download here:
First startup: http://satellitehead.com/stuff/FirstStartup.zip I kinda haphazardly ran the fuel pump relay, and three fusible links to the PCM and fuel pump in order to fire it up. I jacked the car up to be safe and to spin the wheels one time ![]() Feels good to turn it over, the swap has been 16 months of picking up and losing interest here and there. It's nice to know the engine is good, but there is a lot of work ahead to properly wire this thing up and tuck everything away where it's supposed to be (i.e. safe). Sad part is I can't drive the damned thing until I get the brakes working, fab up the stupid plate for the hydraulic actuator and install the steering column. You can rest assured at least now I'll have some damned motivation!!
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#2 |
Zappaphile!
Join Date: Apr 2007
Location: Los Banos, California
Posts: 228
|
Re: LS1 : First startup of GenIII in the truck
great job and congrats are in order..
I am considering an LS2 down the road (too many decisions to make on my truck at this point) If I dont put the LS2 into the truck, it will find a home in my Datsun 240Z... Good luck and keep us all notified on your progress..
__________________
1969 C20 LWB Camper Special - The Beater.. 1998 Cheyenne V6 - 4/6 Drop - For The Son |
![]() |
![]() |
![]() |
#3 |
Cereal Killer
Join Date: Jan 2006
Location: Montgomery, Alabama
Posts: 639
|
Re: LS1 : First startup of GenIII in the truck
What throttle cable are you using?
__________________
If I dont do it....somebody else will. |
![]() |
![]() |
![]() |
#4 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
Lokar.
http://www.ls1tech.com/forums/showpo...&postcount=153 There is all of the install information with links to very, very explanitory pictures. Feel free to checkout my buildup thread over at LS1tech (see my signature), here is a TON of very verbose information and pictures there showing almost all of the steps of my install (I need to go back and take pics of fuel system, and finish out the wiring properly, etc.). Pics will be added and eventually I'll transfer a cleaned up version of the thread into the FAQ section here.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#5 |
Active Member
Join Date: Aug 2001
Location: Villa Rica, Ga
Posts: 297
|
Re: LS1 : First startup of GenIII in the truck
Congrats! That sounded so good!
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: LS1 : First startup of GenIII in the truck
sounds awesome man and looks just as good as it sounds, cant wait to see it on the road in the future
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
![]() |
![]() |
![]() |
#7 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
I can't wait to get shorter seats!!
![]()
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#8 |
Cereal Killer
Join Date: Jan 2006
Location: Montgomery, Alabama
Posts: 639
|
Re: LS1 : First startup of GenIII in the truck
I have read browsed your threads both here and there glad to see your making forward progress. Where i Atl are you? Going to the Summit store tomorrow and then to Uncles place to pick up the windshield frame he hauled back from ebfabmans for me.
__________________
If I dont do it....somebody else will. |
![]() |
![]() |
![]() |
#9 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
I'm literally 2 miles southeast of the I-20/I-75 intersection. If you take I-675 north, it will terminate into Moreland Ave when you hit I-285 (head east). That takes you within one mile of my house, I live off of Confederate Ave, which is maybe 4 miles north (~10 stop lights) of I-675. If you're coming down I-20, if you get off at the Zoo exit, I'm about 5 blocks south of the Zoo. There are five dozen ways to get here.
![]() I've been to Uncle's before, he's a hell of a guy, and you'll be blown away at by some of the stuff he's got if you've never been there before. I need to head out there once this thing is running and pick up a new radiator support, or, at minimum, a new inner fender.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#10 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
PS - If you ar eusing the LS1/LS6 intake on your setup and you want me to fab up a bracket like mine for you, I can do it in about 5 minutes. I have 3 angle brackets leftover.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#11 |
Cereal Killer
Join Date: Jan 2006
Location: Montgomery, Alabama
Posts: 639
|
Re: LS1 : First startup of GenIII in the truck
Maybe i shouldnt leave any money at Summit and take my entire piggy bank to his house
__________________
If I dont do it....somebody else will. |
![]() |
![]() |
![]() |
#12 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
I'm tellin ya. Seriously. While you're at summit, can you pick me up a 7-circuit painless fuse block?
![]()
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#13 |
On the college boy budget...
Join Date: Oct 2005
Location: Athens, Georgia
Posts: 370
|
Re: LS1 : First startup of GenIII in the truck
Awesome man, now just get it on the road and hit up some cruise-ins. The thing is so unsuspecting looking you'll be blowing folks minds when you pop that hood.
__________________
-'68 C10 short/step- 350/350 |
![]() |
![]() |
![]() |
#14 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
![]() I can't wait! Still got some work to go, but the rest is pretty easy, I think? Worst part will be doing the brakes and clutch.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 04-17-2007 at 10:10 AM. |
![]() |
![]() |
![]() |
#15 |
1972 Shorty Owner
Join Date: Feb 2007
Location: Stationed in Cali , born and raised in PHX Arizona.
Posts: 796
|
Re: LS1 : First startup of GenIII in the truck
I'm jelous ......
Currently i am looking for a LQ4 or LQ9 GENIII .... but for some reason my no one will let me total thier escalade ..LOL
__________________
1972 Chevy Shorty C-10- Project In Work http://67-72chevytrucks.com/gallery/...ATT1721941.jpg- New Project |
![]() |
![]() |
![]() |
#16 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
![]() Seriously - check the sales section over at LS1tech. People sell them all day long cheaper than you can find on eBay. I think everyone says avoid everything out of a '99, go 2000+ on the year. If price is not an option and you just want something with no miles on it at all. contact Schram Auto - look them up using Google, or just hit their site on eBay: http://stores.ebay.com/Schram-Auto-Parts You'll find something there with less than 100 miles on it normally. GM dumps off all of their salvage vehicles (ones that get damaged before making it to the lot), you can get some freaking great drivetrains there that have never really been used.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#17 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
Example:
http://cgi.ebay.com/ebaymotors/CHEVY...4024QQtcZphoto $1600 for engine with all accessories. 6.0 longblock. It's out of an '01. Great start right there, a bit pricey for 36k miles, but ... not a bad deal for a complete engine that is gonna give you around 350HP and 350TQ right out the door, bone stock.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#18 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: LS1 : First startup of GenIII in the truck
Awesome! Can't wait to fire mine. I bet your motivation factor just went through the ceiling! I know mine will.
|
![]() |
![]() |
![]() |
#19 |
Too many trucks? Nah...
Join Date: Mar 2002
Location: SW Washington State
Posts: 154
|
Re: LS1 : First startup of GenIII in the truck
Awesome work, and it sounds great. I'm currently pinching pennies to do a LS swap into one of my projects...just can't decide which one.
![]() |
![]() |
![]() |
![]() |
#20 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: LS1 : First startup of GenIII in the truck
very much so! can't wait to get to a junkyard!!!
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#21 |
Proud owner of a 55.1 AD
![]() Join Date: Oct 2006
Location: Desert Hills, AZ
Posts: 460
|
![]()
Wow...Congratulations on the successful first start up.....
It sounded very nice..... Keep up the good work, you truly have a nice truck..... |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|