Lookin at pickin this one up... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

agronomya · 04-20-2007, 08:05 PM

Hey fellas,

I was just lookin around on eBay and I found this in my town.

http://cgi.ebay.com/ebaymotors/1967-...QQcmdZViewItem

I called the guy and I've seen him drivin it around town a little, he lives close. He said he was lookin to get aorund $4000 out of it. For a short bed with original paint and an LT1 in it I didn't think that was to gaud awful. I'm gonna look at getting the cash together but I was gonna see if ya'll had some bad thouhgts about it or was just gonna put it out there for someone else to pick up. Like Sameyrasmea72, who buys every truck in the area

. I'm gonna have to take a look at that collection one day.

AA

weav1 · 04-20-2007, 08:11 PM

EBAY EMAILED THIS TO ME I WAS WATCHING IT THE LAST TIME IT WAS LISTED IF IT WERE CLOSER I WOULD ON IT

19673ontree · 04-20-2007, 08:21 PM

1967
small back glass
original paint
wood floor truck
minimal rust
and you need to think ? for 4K ?
I will think for you ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,if you can get the money go over there and buy it !

GREASEMONKEY72 · 04-21-2007, 03:54 AM

the shape that trucks in and with the wood bed and small window i say go for it, maybe you can try to talk him down as much as you can but 4k aint bad, goodluck with it and dont forget to post some pics of it when you get it home

72armyswbtruck · 04-21-2007, 04:15 AM

In a Heartbeat if I had the money.

Slammed70 · 04-21-2007, 04:47 AM

Hmmm.....96 model police car eh?

Thats not an LT1 my friend, its a 9C1. Essentially its the same...'cept its a HIGH revin 265, cast iron headed version. And it only has about 9:1 compression. In my opinion they are better(more reliable)than the vulnerable LT1s. As long as you dont let it get over 200 degrees or so you should be very happy with it.

Also, I just wanted to mention that is one of the cleanest swaps Ive seen. Theres no unsightly harness strung about, its just....clean. I like it.

Good find, good job, good price too.....I really like it man.

GREASEMONKEY72 · 04-21-2007, 04:58 AM

yea that is one clean swap, time well spent, its a good buy for sure

**Palf70Step** · 04-21-2007, 05:46 AM

Nice looking ride. You should run fast with teh checkbook and bring it home...to MY house

ghackett1 · 04-21-2007, 08:05 AM

Thats a sweet truck and looks really solid. Surface rust is nothing. Hopefully you can get it.

agronomya · 04-21-2007, 04:58 PM

I'm gonna make a low, last minute bid on eBay because it's no where near his $4k wanting price right now. Then if I win at least no one else gets it right now until I can get the cash. He said he was tired of listing it locally because no one ever had the $$ so I doubt anyone in town that hasn't seen the eBay listing will know about it. I can't believe I let you guys know, now one of ya'll is gonna grab it

.
I honestly can not buy it until I sell my '69 and I placed an add for it last night (thrifty). I like mine and haven't had it long but this one is just so much more of what I wanted. It has power steering, power discs and a short, wood bed. I have none of that. If I had been able to buy this back in January I would have EASILY pased on my truck. I hate being poor and in grad school.
Seriously, if anyone that actually has the $$ would want it I would be more than willing to go check it out for you or something. And he told me he keeps it in a shop so he could probably store it if he has to.
I'll let you guys know how it goes.

agronomya · 04-21-2007, 05:06 PM

Quote:

Originally Posted by Slammed70

Hmmm.....96 model police car eh?

Thats not an LT1 my friend, its a 9C1. Essentially its the same...'cept its a HIGH revin 265, cast iron headed version. And it only has about 9:1 compression. In my opinion they are better(more reliable)than the vulnerable LT1s. As long as you dont let it get over 200 degrees or so you should be very happy with it.

Also, I just wanted to mention that is one of the cleanest swaps Ive seen. Theres no unsightly harness strung about, its just....clean. I like it.

Good find, good job, good price too.....I really like it man.

Yeah, I forgot I was gonna comment on this in my last post. My '69 has the 200 horse Goodwrench 350 with a cam that maxs at about 4000 rpm. And it still has a warranty on it until March of '08.
So, even though it's the iron headed version it would be so much more than what I have now (HP) and is a lot better starting block in my opinion.
Thanks for the heads up though. I had no idea there was any difference between the F body/vette LT1s and the 9C1 version.

04-20-2007, 08:05 PM	#1
agronomya Junior Member Join Date: Jan 2007 Location: Lubbock, TX Posts: 77	Lookin at pickin this one up... Hey fellas, I was just lookin around on eBay and I found this in my town. http://cgi.ebay.com/ebaymotors/1967-...QQcmdZViewItem I called the guy and I've seen him drivin it around town a little, he lives close. He said he was lookin to get aorund $4000 out of it. For a short bed with original paint and an LT1 in it I didn't think that was to gaud awful. I'm gonna look at getting the cash together but I was gonna see if ya'll had some bad thouhgts about it or was just gonna put it out there for someone else to pick up. Like Sameyrasmea72, who buys every truck in the area . I'm gonna have to take a look at that collection one day. AA __________________ They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month

04-20-2007, 08:11 PM	#2
weav1 Registered User Join Date: Feb 2007 Location: plainfield indiana Posts: 283	Re: Lookin at pickin this one up... EBAY EMAILED THIS TO ME I WAS WATCHING IT THE LAST TIME IT WAS LISTED IF IT WERE CLOSER I WOULD ON IT

04-20-2007, 08:21 PM	#3
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: Lookin at pickin this one up... 1967 small back glass original paint wood floor truck minimal rust and you need to think ? for 4K ? I will think for you ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,if you can get the money go over there and buy it ! __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-21-2007, 03:54 AM	#4
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Lookin at pickin this one up... the shape that trucks in and with the wood bed and small window i say go for it, maybe you can try to talk him down as much as you can but 4k aint bad, goodluck with it and dont forget to post some pics of it when you get it home __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

04-21-2007, 04:15 AM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Lookin at pickin this one up... In a Heartbeat if I had the money. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-21-2007, 04:58 AM	#7
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Lookin at pickin this one up... yea that is one clean swap, time well spent, its a good buy for sure __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

04-21-2007, 05:46 AM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Re: Lookin at pickin this one up... Nice looking ride. You should run fast with teh checkbook and bring it home...to MY house __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-21-2007, 08:05 AM	#9
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: Lookin at pickin this one up... Thats a sweet truck and looks really solid. Surface rust is nothing. Hopefully you can get it.

04-21-2007, 04:58 PM	#10
agronomya Junior Member Join Date: Jan 2007 Location: Lubbock, TX Posts: 77	Re: Lookin at pickin this one up... I'm gonna make a low, last minute bid on eBay because it's no where near his $4k wanting price right now. Then if I win at least no one else gets it right now until I can get the cash. He said he was tired of listing it locally because no one ever had the $$ so I doubt anyone in town that hasn't seen the eBay listing will know about it. I can't believe I let you guys know, now one of ya'll is gonna grab it. I honestly can not buy it until I sell my '69 and I placed an add for it last night (thrifty). I like mine and haven't had it long but this one is just so much more of what I wanted. It has power steering, power discs and a short, wood bed. I have none of that. If I had been able to buy this back in January I would have EASILY pased on my truck. I hate being poor and in grad school. Seriously, if anyone that actually has the $$ would want it I would be more than willing to go check it out for you or something. And he told me he keeps it in a shop so he could probably store it if he has to. I'll let you guys know how it goes. __________________ They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.