Parting out 72 C20 Camper Special - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

396muncie · 02-20-2007, 10:24 AM

I'll take the auxilliary tank selector. Where did the brown and pink wire plug into? Any idea where the blue one goes? Let me know your Paypal address. Thanks, Chris

centsless · 02-20-2007, 04:37 PM

Meathead & penningp, items left @8 this morning!
70c10 PM sent
396muncie PM sent

meathead95 · 02-20-2007, 05:22 PM

thanks

396muncie · 02-21-2007, 01:39 PM

Payment sent. Thanks

centsless · 02-21-2007, 05:03 PM

396muncie--selector switch & wiring shipped this afternoon

396muncie · 02-21-2007, 06:13 PM

Great, thanks!!

centsless · 02-21-2007, 06:17 PM

Quote:

Originally Posted by patred70

sorry i realized they arfe 8 lug how much to send to 95363

I did a ball park estimate on the shipping, and if I put one rotor, spindle, and caliper in a box, and guessed it at 50 lbs, it comes up $42. That would be one side, so shipping for the entire setup would be about $84. I will sell the entire setup for $200 shipped.

racerman85 · 02-21-2007, 10:56 PM

I talked to my Dad and he said we come down Sunday we'll probably take the whole truck home. I'll let you know for sure tomorrow hopefully. Thanks!

centsless · 02-27-2007, 07:12 PM

Whole truck is not sold. P/S unit is sold to racerman85. I am going to get rid of this truck this weekend hopefully, so let me know what you need! some of the parts that are ready to go: gas pedal assy complete with cable and carb bracket $30 shipped. Power brake booster, brackets, and prop. valve, $50 plus shipping. All of the wiring in this truck is good so let me know if you guys want any of it.....

**special-K** · 02-27-2007, 09:41 PM

Did the bed deal go through with Chevydad?

67mbsc · 02-27-2007, 11:02 PM

Power brake booster, brackets, and prop. valve, $50 plus shipping. All of the wiring in this truck is good so let me know if you guys want any of it.....[/QUOTE]

I'll take the power brake setup. Sending you a PM.
Thanks,
Mike

centsless · 02-27-2007, 11:24 PM

Quote:

Originally Posted by special-K

Did the bed deal go through with Chevydad?

Bed is available, I would have to get it gone within two weeks....

centsless · 02-28-2007, 04:40 PM

67mbsc, $50 booster, $50 all wiring, $16 shipping PM sent
anyone need anything else before it leaves this weekend??

**special-K** · 02-28-2007, 04:43 PM

Cool,looking for the cross sills.I should get over and get them outta there,then.I need to build a shortbed and I need a floor.Gotta torch handy?

70c10 · 03-01-2007, 11:18 AM

Quote:

Originally Posted by special-K

I need to build a shortbed and I need a floor.

Tim, You are in luck because Bob also has a longbed floor complete with wheel tubs that you could easily cut down to make your shortbed floor

. For the prices you can't beat it.

**special-K** · 03-01-2007, 04:23 PM

Thanks Jim.I hope to get to Bob`s this weekend if we work it out.I`m building a`67 short/wide GMC from scratch...parts stash.I want a cruiser like you guys.

**twotrucks** · 03-01-2007, 09:08 PM

I would like to have the disc brake hose brackets that are welded to front crossmember. Am I too late?

**special-K** · 03-02-2007, 11:27 PM

Can I come over this weekend???

IvelDesigns · 03-03-2007, 01:12 AM

how much for the heater control (assuming it's non A/C, has all 3 arms, and is in good shape) shipped to 50624?

thanks

centsless · 03-03-2007, 01:10 PM

IvelDesigns The heater control has the center lever broken and is not in very nice shape.
Sorry
Bob

sjarrett71 · 03-03-2007, 02:27 PM

Do you still have the truck? If so, I need the complete under dash wire harness if it's good. How much with shipping to 65401?

centsless · 03-03-2007, 02:35 PM

wiring is sold to 67mbsc pending payment. If it falls through, it is yours for $50 plus shipping. I will let you know.
Bob

centsless · 03-03-2007, 05:54 PM

truck is gone. I will list any remaining parts on a separate thread. Thanks Everyone!!

500dana · 04-20-2007, 06:25 PM

Do you still have Custom Camper emblems?

cire · 04-27-2007, 02:42 AM

I am looking for a stock under-the -dash speaker for 68c20. Do you still have parts available? If so, how much for the speaker shipped to 55432? I use pay-pal. Thanks, Eric

02-20-2007, 10:24 AM	#51
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Parting out 72 C20 Camper Special I'll take the auxilliary tank selector. Where did the brown and pink wire plug into? Any idea where the blue one goes? Let me know your Paypal address. Thanks, Chris __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

02-20-2007, 04:37 PM	#52
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special Meathead & penningp, items left @8 this morning! 70c10 PM sent 396muncie PM sent __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-20-2007, 05:22 PM	#53
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Parting out 72 C20 Camper Special thanks __________________ 72 2wd blazer 72 swb 4x4

02-21-2007, 01:39 PM	#54
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Parting out 72 C20 Camper Special Payment sent. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

02-21-2007, 05:03 PM	#55
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special 396muncie--selector switch & wiring shipped this afternoon __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-21-2007, 06:13 PM	#56
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Parting out 72 C20 Camper Special Great, thanks!! __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

02-21-2007, 10:56 PM	#58
racerman85 Registered User Join Date: Nov 2006 Location: Windsor, PA Posts: 318	Re: Parting out 72 C20 Camper Special I talked to my Dad and he said we come down Sunday we'll probably take the whole truck home. I'll let you know for sure tomorrow hopefully. Thanks!

02-27-2007, 07:12 PM	#59
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special Whole truck is not sold. P/S unit is sold to racerman85. I am going to get rid of this truck this weekend hopefully, so let me know what you need! some of the parts that are ready to go: gas pedal assy complete with cable and carb bracket $30 shipped. Power brake booster, brackets, and prop. valve, $50 plus shipping. All of the wiring in this truck is good so let me know if you guys want any of it..... __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-27-2007, 09:41 PM	#60
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting out 72 C20 Camper Special Did the bed deal go through with Chevydad? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-27-2007, 11:02 PM	#61
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: Parting out 72 C20 Camper Special Power brake booster, brackets, and prop. valve, $50 plus shipping. All of the wiring in this truck is good so let me know if you guys want any of it.....[/QUOTE] I'll take the power brake setup. Sending you a PM. Thanks, Mike __________________ 2% Forever!!!!!!

02-28-2007, 04:40 PM	#63
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special 67mbsc, $50 booster, $50 all wiring, $16 shipping PM sent anyone need anything else before it leaves this weekend?? __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-28-2007, 04:43 PM	#64
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting out 72 C20 Camper Special Cool,looking for the cross sills.I should get over and get them outta there,then.I need to build a shortbed and I need a floor.Gotta torch handy? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-28-2007 at 04:43 PM.

03-01-2007, 04:23 PM	#66
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting out 72 C20 Camper Special Thanks Jim.I hope to get to Bob`s this weekend if we work it out.I`m building a`67 short/wide GMC from scratch...parts stash.I want a cruiser like you guys. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-01-2007, 09:08 PM	#67
twotrucks Junior Member Join Date: Jun 2003 Location: Louisville,Ky Posts: 383	Re: Parting out 72 C20 Camper Special I would like to have the disc brake hose brackets that are welded to front crossmember. Am I too late?

03-02-2007, 11:27 PM	#68
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting out 72 C20 Camper Special Can I come over this weekend??? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

03-03-2007, 01:12 AM	#69
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Parting out 72 C20 Camper Special how much for the heater control (assuming it's non A/C, has all 3 arms, and is in good shape) shipped to 50624? thanks __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

03-03-2007, 01:10 PM	#70
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special IvelDesigns The heater control has the center lever broken and is not in very nice shape. Sorry Bob __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

03-03-2007, 02:27 PM	#71
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting out 72 C20 Camper Special Do you still have the truck? If so, I need the complete under dash wire harness if it's good. How much with shipping to 65401? __________________ -Scott-

03-03-2007, 02:35 PM	#72
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special wiring is sold to 67mbsc pending payment. If it falls through, it is yours for $50 plus shipping. I will let you know. Bob __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

03-03-2007, 05:54 PM	#73
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting out 72 C20 Camper Special truck is gone. I will list any remaining parts on a separate thread. Thanks Everyone!! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

04-20-2007, 06:25 PM	#74
500dana Registered User Join Date: Apr 2007 Location: OHIO Posts: 9	Re: Parting out 72 C20 Camper Special Do you still have Custom Camper emblems?

04-27-2007, 02:42 AM	#75
cire Registered User Join Date: Feb 2007 Location: Spring Lake Park, MN Posts: 11	Re: Parting out 72 C20 Camper Special I am looking for a stock under-the -dash speaker for 68c20. Do you still have parts available? If so, how much for the speaker shipped to 55432? I use pay-pal. Thanks, Eric

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.