|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-27-2007, 11:19 AM
|
#3 |
|
K5Camper
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: K5 Lifted to K10 stock suspension swap.
As long as its a K10 the springs will swap right over. The 3/4 tons and up had the longer rear springs that wouldn't work on a K5.
The rear springs on the K5 and the K10 should measure out to 52". The front springs on k5's, K10's, K20's and K30's are all the same length, they just hold different wieghts. Just make sure you go out and buy 16 new u-bolts. You don't want to reuse the old ones.
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode