Best way to remove engine mounts WITH engine in truck... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70burbulgy · 12-02-2002, 10:04 PM

Changed 3 sets in the last six months 1 set on a 4X4 which as mentioned above you have to watch the dist. on the firewall. Otherwise I got along fine with a block of wood under the oilpan. Unbolt the two bolts on the fan shroud and let it go up with the engine, you should be able to get 3 inches easily. Probably did not spend more than 1.5 hours on any of them. Just my thoughts.

Oh, helps to wash engine heavily before you start

12-02-2002, 10:04 PM	#1
70burbulgy Registered User Join Date: Feb 2002 Location: McPherson, KS 67460 Posts: 60	engine mounts Changed 3 sets in the last six months 1 set on a 4X4 which as mentioned above you have to watch the dist. on the firewall. Otherwise I got along fine with a block of wood under the oilpan. Unbolt the two bolts on the fan shroud and let it go up with the engine, you should be able to get 3 inches easily. Probably did not spend more than 1.5 hours on any of them. Just my thoughts. Oh, helps to wash engine heavily before you start

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.