Factory Air Parts, Other Misc. Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Orange · 05-07-2007, 09:42 PM

I want to get rid of all this stuff. So please, help me get it all gone without just tossing it. I want people to be able to use what is usable. So, if my prices are unreasonable and you want something, say it here, so I will know. Paypal is preferred if possible. Everything is at 30736. The oil in the floor is from a recent tranny swap and prior pan gasket leak - so please, no wise cracks.

Name: Parts1.jpg
Views: 377
Size: 64.5 KB

Name: Parts2.jpg
Views: 382
Size: 73.4 KB

Name: Parts3.jpg
Views: 377
Size: 75.0 KB

Name: Parts4.jpg
Views: 381
Size: 69.2 KB

Name: Parts5.jpg
Views: 370
Size: 61.3 KB

Orange · 05-07-2007, 09:45 PM

More...

Name: P5071804.JPG
Views: 366
Size: 68.5 KB

Name: P5071806.JPG
Views: 360
Size: 83.0 KB

Name: P5071807.JPG
Views: 366
Size: 80.8 KB

Name: P5071808.JPG
Views: 364
Size: 83.3 KB

Brackets are for of a SB Chevy pass. side A/C. The manifold bracket has been modified to clear header.

For all the A/C and related parts you see here I'll say $250/offer.
The parts are at 30736.

The A/C Controls on the left are totally working (no broken levers) and in "good" condition (some surface marks on the chrome).
The A/C Controls on the right has a broken top lever and are what I'd say 4 on the 10 scale (but I am a perfectionist). The chrome isn't coming off, but it is ugly in a few spots. They face isn't as clean as the other.
The heater control has a broken top lever but a replacement - it also seems to be broken off the rivets that hold it together, not sure if that's normal when fixing the lever or not.

The flappers are in the units you see, and flap/seal. This unit was in my truck working about 2 years ago. It was ran on R134a.

Chrome vent balls are new in plastic.

That is an extra flapper in the one pic you see. I don't know if you can replace the rubber or not, but it is bad. Just an extra I found.

I can ship UPS, but it is at your cost.
The stuff isn't light, or small.

More stuff coming.

DLB

Orange · 05-07-2007, 10:00 PM

Add another $45 for the condenser with all the above or $55 stand alone/offer.
Condenser with new drier off of above system...Could ship, but large.
Name: condenser.jpg
Views: 353
Size: 44.7 KB

Name: condenser.jpg
Views: 353
Size: 44.7 KB

Add another $50 for compressor with the above, or $65 stand alone/offer.
Compressor. I COULD ship this, but it would cost. This is a new compressor bought at Advance or Auto Zone. Ran on R134a. I also have the old Harrison decal that you see. It has lost it's stick, but if you can't buy them, and someone needs one for a factory restore, let me know and I'll send it to you. It could be re-stuck.
Name: compressor.jpg
Views: 353
Size: 56.0 KB

Name: compressor.jpg
Views: 353
Size: 56.0 KB

Factory AM Radio (out of 1969 GMC) $2,000 or best reasonable offer (we have to list a price, it's the rules, and I don't know what these are honestly worth, so be honest with me).
Before cleaning anything at all...
Name: am1.JPG
Views: 354
Size: 79.6 KB

After cleaning the right side top.
Name: am2.JPG
Views: 355
Size: 66.5 KB

Back.

No knobs, sorry.

DLB

Orange · 05-07-2007, 10:15 PM

A pair of tailgate trunnions. $5+ shipping.
Name: Trunion.jpg
Views: 346
Size: 41.2 KB

Factory shift indicator - 1971 non-tilt column. GONE.

This is a handle that says for a 77-80 truck/van. If you can use it, it's yours. Give me a few dollars to ship it.
Name: handle.jpg
Views: 423
Size: 56.3 KB

Name: handle.jpg
Views: 423
Size: 56.3 KB

This is a dash I painted when I was a poor High School kid. (Now I'm a poor working man). If someone has a red themed interior truck they are working on and would like to see what something like this done up nice might look like, send me some shipping money.
Name: dash1.JPG
Views: 347
Size: 65.0 KB

Name: dash1.JPG
Views: 347
Size: 65.0 KB

Name: dash2.JPG
Views: 343
Size: 64.6 KB

It looked good for the time, I don't have any pics installed though.

DLB

Orange · 05-07-2007, 10:19 PM

Name: mirror1.JPG
Views: 341
Size: 55.6 KB

Name: mirror2.JPG
Views: 342
Size: 36.9 KB

Good mirror arm $7 + shipping.

The bottom pic shows the only bad spot in the arm (some of what you see is dirt). This isn't chromed, just bare metal. Black.

DLB

PT'S 70 CST · 05-07-2007, 10:38 PM

If you are willing to split it up I will take the brakets and the shift indicator pending price.

PT

Orange · 05-08-2007, 08:29 AM

I will split up if I can get most everything accounted for.

DLB

Luvlegs · 05-08-2007, 01:08 PM

I could use the shift indicator.... paypal?

Orange · 05-08-2007, 02:55 PM

Quote:

Originally Posted by Luvlegs

I could use the shift indicator.... paypal?

PT is already in line for it...he is just waiting to see if the brackets get split up.
If he wants to pass for you, then that's up to him.

DLB

PT'S 70 CST · 05-08-2007, 05:12 PM

If luvlegs needs it then he can have it, I was going to get it for a spare.

PT

72BBCTRUCK · 05-08-2007, 05:29 PM

I would be interested in the A/C parts. I'm from lafayette, GA new to this site. If you can email me @ neillharris@yahoo.com I would like to get your info.

Luis_gz06 · 05-08-2007, 06:05 PM

Orange.
Will you only sell the A/C manifold bracket and the other one that goes in the intake manifold like shown in the first pic!! But looks like one of the guys wants all of them!!! Well if im lucky, then give me a price for those two. Thats all I need for my A/C setup. Thanks, Luis.

Orange · 05-08-2007, 09:37 PM

Like you said Luis - somebody else already in line, and I would rather not split them up.

I'll give this another day or so and then start splitting it up.

DLB

st1x10 · 05-08-2007, 10:34 PM

I would be interested in the shift indicator. I guess I will jump in line behind luvlegs.

OhNoJoe · 05-09-2007, 07:33 AM

I am interested in the a/c stuff. I have my brackets and the control levelers but the inside and outside exchange boxes cables and ducts and the drier maybe even the compressor (shipping is an issue)
Can you shoot me a pm?
Thanks,
joe

Orange · 05-09-2007, 08:26 AM

Quote:

Originally Posted by 72BBCTRUCK

I would be interested in the A/C parts. I'm from lafayette, GA new to this site. If you can email me @ neillharris@yahoo.com I would like to get your info.

I totally missed this post...
Welcome to the board.

After we find what goes here, then we'll get the rest sorted. Luvlegs it looks like the shift indicator is yours. $5 Paypal is fine.
Paypal is dblevins @ signalmachine.com

On the brackets and for OhNoJoe, I'll post back asap.

DLB

Luvlegs · 05-09-2007, 08:56 AM

Paypal sent! Thanks

Orange · 05-09-2007, 09:01 AM

Got your payment - will try to get it out today - but definitely by tomorrow.
(I don't have the stuff with me here, so it's hard to guarantee I can get home at lunch and get back and get it shipped in time).

DLB

**ScottH** · 05-09-2007, 10:29 AM

I could use the 77-80 window handle, if you could let me know price to 08753 and payment method I would appreciate it.

Thanks.

Scott

Orange · 05-09-2007, 11:01 AM

$5 will cover the shipping. If you can send it Paypal, that's best for me.
Paypal is dblevins @ signalmachine.com.

Otherwise, PM me if you need to send a MO, cash or whatever (oh yea, I forgot, you can't send cash through the mail...)

DLB

PT'S 70 CST · 05-09-2007, 11:41 AM

Orange I am still first inline on the complete a/c bracket set correct, pending price.

PT

Orange · 05-09-2007, 03:16 PM

Quote:

Originally Posted by PT'S 70 CST

Orange I am still first inline on the complete a/c bracket set correct, pending price.

PT

Yes, if the batch get's split.
72BBCTRUCK may be interested in all the A/C parts together, I don't know. He may not need the brackets (given his User Name).

I'd like to send it out together though if he needed it to save hunting stuff down.

Hopefully I will hear back from him soon (e-mail) and I'll post up. Regardless, if he doesn't take the brackets either way, their yours. We'll get a price together that pleases us both.

DLB

Orange · 05-09-2007, 09:07 PM

Quote:

Originally Posted by PT'S 70 CST

Orange I am still first inline on the complete a/c bracket set correct, pending price.

PT

He doesn't need the brackets, so PT, I will PM you.

DLB

OhNoJoe · 05-11-2007, 10:02 AM

I got the brackets I'm using this for a 292 so I need different brackets. But I am interested in the other a/c parts.
Sorry for the confustion.
Joe

Orange · 05-11-2007, 11:41 AM

Joe - not a problem.
I apologize on my end. I missed an earlier post.

72BBC is supposed to come by and look at the stuff and let me know if he can needs it or not (he's local to me) and I'll post what happens from there.

DLB

05-07-2007, 09:42 PM	#1
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Factory Air Parts, Other Misc. Parts I want to get rid of all this stuff. So please, help me get it all gone without just tossing it. I want people to be able to use what is usable. So, if my prices are unreasonable and you want something, say it here, so I will know. Paypal is preferred if possible. Everything is at 30736. The oil in the floor is from a recent tranny swap and prior pan gasket leak - so please, no wise cracks. __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index. Last edited by Orange; 05-07-2007 at 10:17 PM.

05-07-2007, 09:45 PM	#2
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts More... Brackets are for of a SB Chevy pass. side A/C. The manifold bracket has been modified to clear header. For all the A/C and related parts you see here I'll say $250/offer. The parts are at 30736. The A/C Controls on the left are totally working (no broken levers) and in "good" condition (some surface marks on the chrome). The A/C Controls on the right has a broken top lever and are what I'd say 4 on the 10 scale (but I am a perfectionist). The chrome isn't coming off, but it is ugly in a few spots. They face isn't as clean as the other. The heater control has a broken top lever but a replacement - it also seems to be broken off the rivets that hold it together, not sure if that's normal when fixing the lever or not. The flappers are in the units you see, and flap/seal. This unit was in my truck working about 2 years ago. It was ran on R134a. Chrome vent balls are new in plastic. That is an extra flapper in the one pic you see. I don't know if you can replace the rubber or not, but it is bad. Just an extra I found. I can ship UPS, but it is at your cost. The stuff isn't light, or small. More stuff coming. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index. Last edited by Orange; 05-07-2007 at 09:51 PM.

05-07-2007, 10:00 PM	#3
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts Add another $45 for the condenser with all the above or $55 stand alone/offer. Condenser with new drier off of above system...Could ship, but large. Add another $50 for compressor with the above, or $65 stand alone/offer. Compressor. I COULD ship this, but it would cost. This is a new compressor bought at Advance or Auto Zone. Ran on R134a. I also have the old Harrison decal that you see. It has lost it's stick, but if you can't buy them, and someone needs one for a factory restore, let me know and I'll send it to you. It could be re-stuck. Factory AM Radio (out of 1969 GMC) $2,000 or best reasonable offer (we have to list a price, it's the rules, and I don't know what these are honestly worth, so be honest with me). Before cleaning anything at all... After cleaning the right side top. Back. No knobs, sorry. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-07-2007, 10:15 PM	#4
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts A pair of tailgate trunnions. $5+ shipping. Factory shift indicator - 1971 non-tilt column. GONE. This is a handle that says for a 77-80 truck/van. If you can use it, it's yours. Give me a few dollars to ship it. This is a dash I painted when I was a poor High School kid. (Now I'm a poor working man). If someone has a red themed interior truck they are working on and would like to see what something like this done up nice might look like, send me some shipping money. It looked good for the time, I don't have any pics installed though. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index. Last edited by Orange; 05-09-2007 at 09:19 AM.

05-07-2007, 10:19 PM	#5
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts Good mirror arm $7 + shipping. The bottom pic shows the only bad spot in the arm (some of what you see is dirt). This isn't chromed, just bare metal. Black. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-07-2007, 10:38 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Factory Air Parts, Other Misc. Parts If you are willing to split it up I will take the brakets and the shift indicator pending price. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-08-2007, 08:29 AM	#7
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts I will split up if I can get most everything accounted for. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-08-2007, 01:08 PM	#8
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Factory Air Parts, Other Misc. Parts I could use the shift indicator.... paypal? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

05-08-2007, 05:12 PM	#10
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Factory Air Parts, Other Misc. Parts If luvlegs needs it then he can have it, I was going to get it for a spare. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-08-2007, 05:29 PM	#11
72BBCTRUCK Registered User Join Date: Feb 2007 Location: Lafayette, ga Posts: 7	Re: Factory Air Parts, Other Misc. Parts I would be interested in the A/C parts. I'm from lafayette, GA new to this site. If you can email me @ neillharris@yahoo.com I would like to get your info.

05-08-2007, 06:05 PM	#12
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Factory Air Parts, Other Misc. Parts Orange. Will you only sell the A/C manifold bracket and the other one that goes in the intake manifold like shown in the first pic!! But looks like one of the guys wants all of them!!! Well if im lucky, then give me a price for those two. Thats all I need for my A/C setup. Thanks, Luis.

05-08-2007, 09:37 PM	#13
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts Like you said Luis - somebody else already in line, and I would rather not split them up. I'll give this another day or so and then start splitting it up. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-08-2007, 10:34 PM	#14
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: Factory Air Parts, Other Misc. Parts I would be interested in the shift indicator. I guess I will jump in line behind luvlegs. __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

05-09-2007, 07:33 AM	#15
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Factory Air Parts, Other Misc. Parts I am interested in the a/c stuff. I have my brackets and the control levelers but the inside and outside exchange boxes cables and ducts and the drier maybe even the compressor (shipping is an issue) Can you shoot me a pm? Thanks, joe

05-09-2007, 08:56 AM	#17
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Factory Air Parts, Other Misc. Parts Paypal sent! Thanks __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!



Register or Log In To remove these advertisements.

05-09-2007, 09:01 AM	#18
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts Got your payment - will try to get it out today - but definitely by tomorrow. (I don't have the stuff with me here, so it's hard to guarantee I can get home at lunch and get back and get it shipped in time). DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-09-2007, 10:29 AM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Factory Air Parts, Other Misc. Parts I could use the 77-80 window handle, if you could let me know price to 08753 and payment method I would appreciate it. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-09-2007, 11:01 AM	#20
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts $5 will cover the shipping. If you can send it Paypal, that's best for me. Paypal is dblevins @ signalmachine.com. Otherwise, PM me if you need to send a MO, cash or whatever (oh yea, I forgot, you can't send cash through the mail...) DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-09-2007, 11:41 AM	#21
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Factory Air Parts, Other Misc. Parts Orange I am still first inline on the complete a/c bracket set correct, pending price. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-11-2007, 10:02 AM	#24
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Factory Air Parts, Other Misc. Parts I got the brackets I'm using this for a 292 so I need different brackets. But I am interested in the other a/c parts. Sorry for the confustion. Joe

05-11-2007, 11:41 AM	#25
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Factory Air Parts, Other Misc. Parts Joe - not a problem. I apologize on my end. I missed an earlier post. 72BBC is supposed to come by and look at the stuff and let me know if he can needs it or not (he's local to me) and I'll post what happens from there. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.