![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
How best to weld stake pockets?
One of my middle stake pockets is detaching from the inner bed due to heavy use. Here's a pic;
![]() I have never done any welding,only sweating pipes.What do I need to do to get a very strong weld on this? Thanks-Brian
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: How best to weld stake pockets?
I would drill out the remaining spot welds, grind the metal clean, spray some weld thru primer and drill some 3/8" holes where the spot welds were and plug weld it back in place. Just my suggestion.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
Re: How best to weld stake pockets?
Hey thanks. I may just take it in and have a pro do it,but I wanted some ideas anyway. Always did want to get a welder but I don't know squat about the subject.-Brian
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: How best to weld stake pockets?
Glad I could help. That would be good practice.
|
![]() |
![]() |
![]() |
#5 |
~Rest In Peace~
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
|
Re: How best to weld stake pockets?
take a welding class at jr college on weekends
__________________
is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2006
Location: Kaufman, Tx
Posts: 827
|
Re: How best to weld stake pockets?
I was going to suggest the exact same thing.
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! ![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
Re: How best to weld stake pockets?
Thanks guys,but at this stage in life I don't think I'll be going to college to fix a stake-pocket! Probly just pay the man.LOL
I know they rent welders at one of the Home Depots around here.Maybe I'll practice on some scrap and then do what Aaron says. Thx again. Brian
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. Last edited by WorkinLonghorn; 05-08-2007 at 01:18 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|